first off im not buying them new i know it would be easy to make im a diy pearsonso i toke my seats out to put my new racing seats in. the factory brackets are pretty much just strait bars so im just going to make my owen. instead of paying 100$ for aftermarket ones that most ppl cant...
no if your buying from a place like autozone or advanced auto they do not come with an intermediat shaft. its just the axel that slides in to it. i just replaced both front axels i got them from a company named powerline and they look nice looks like all cnc machened i spent a lil over 220$...
ok just went threw my post and then found that you were who ya what ever but i put a 2g rad in my 1g the bottom mounts didnt mount up right so i had to bed the drivers side down and knock out the rubber busshing also for any one wonderingthe bottom hose line up perfect but the upper house is...
i put a alum racing rad in my 1g it was for a 2g and it does not line up right at the bottom mounts so i had to make some but i got it in and looks great with in about 15mins
ok should i put the engine and tranny in as one or would it be easer to install the engine or tranny first then put the other part on after one of them is bolted in and anytips on making this easy and fast this is for a 1g awd thanks :thumb:
ok need to know how much do i tourq the fly wheel to crank bolt on a 1g 6bolt. i know i should use locktight on them should i also use locktight on the clutch PP bolts to ?
when im driving daily i never get over 10psi but when i get on it and as soon as i get past 125 mph my boost starts to go up from 10 psi to 13+psi so i let off. not wanting to blow the engine im running an open down pipe and K&N filter "boost gauge" free mods ' rest is stock
car falls on its face. souds like its not geting spark or anything then check engine light comes on. and then runs fine only happens up hills mostly. cheack engine light goes off seconds after it all happens. mostly in 1st gear1g fwd 5spd turbo
yeah i agree whith what they said but if you know your way around a car it shouldnt be a problem. i got my first dsm and it wasnt running the guy said id be lucky to have it run in 4 mounths. i had it running in about 3 hours in front of his house. and i knew nothing about dsm's if you do...
ok im taking my 1g fwd tsi to the track but i dont want to break anything. i know i need new axels and i have a small gas leak them will both be fixed b4 i go. what all should i cheack like compresion" oil" trany fluid" belts "plugs"should i cheack my timing ?"what all should i replace...
i have a fwd so will tha n/a fwd assembly work ? they dont have a fwd tsi in the local junk yard so ineed to know if the fwd n/a fuel assembly workalso is there a difrence in the 89-91 -92-93 ?
mine has has a pine hole leak in the tubing in a spot that cant be fixed + its rusted to hell. can i take the fuel pump whole bracket out of a n/a and put it in my tsi and put in my 255 ?this is what im talking about but this is one form a 2g
ill be driving normaly and then it will miss or stuble its only happend at low speeds so fare the cheack egnine light will come on then go off. what could it be ?
ok im buying the megan 2g gsx down pipe the guy ^^^ we talked. he said all i have to do is put a new flang on the end cuzz it has a 3" flange and the cat is 2.?. so im running a test pipe and i think ill have to chage that any way cuzz the way its angeld wont bolt up to the test pipe. so ill...
if worst comes to worst ill have to pay the 200. but im going to wait and just drive up to summit racing and get that flex section and take it to this lil shop and hope to get it done for about 95$ form what the guy said . press bent 3" i realy wanted manderl tho im running an open down pipe and...
what shop did you go to every shop around here 3rd thing they say to me is what about your cat i say i have a 3" test pipe they say oh well we cant touch it 10'000$ fine if you dont have a cat on it i throw away my old cat .what size pipe did you get bent was it manderlthey want 90$ for...
is it worth what ? you didnt put up a price .this will prolly be closed also.and it looks like its going to take you some time to get all that installed .turbo and ecu ebay or dsmtrader or here in the classifieds .good luck if you do get it :thumb:.
any one have 1 or the other and whats some up and dones to them.can i use both of them ?basicly i want to know b4 i buy something and then have to buy the other thanks for the help
no you odnt need the fly wheel i didnt need it in my 1g awd so im shure you dont need it. just use your stock one you should be fine. good luck with the new clutch :thumb:
ok used teflon tape and i didnt relize that there was a bras crush fitting thats why it wasnt staying in there so thanks agine for every ones help got it in and works great
how does the vacum line hook in to the back of the boost gauge is it suposed to be air tighti have it just sitting in there now and my boost guage seems to be workingdo i need to put some kind of sealnt around the bolts that the favum line goes in to to hold it thereany help would...
i didnt even know you could do this and i can get a 86 turbo rx7 for 200$ i think im going to have a new project for this up coming winter wow :eek:http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4558196840&indexURL=3#ebayphotohostinginfo on how to do the swap it just...
didnt have time to try to tightin it ill do that 2 day when im fixing the half shaft i snaped it was to dark out to try last night thanks for the help tho
my car has a line coming out of the tank has 2 bolts that screew in to each other. and its leaking gas out of that were do i get a new fuel line at. its about a 6inch peace ? its also realy rusted is it going to be hurd to get off.
how can i tell if it only has 10 miles on it. i can still see the white act logo on the disk but it look more skin then an almost new stock clutch i have sitting around. it also has serfice rust on the presshure plate and some of the yelloow paints coming off . ill try to get pics but my cam...
put new alternater in then batter termanel fused to the hood. like welded it self to it so i had to open it and it broke. got new termanels had to put them up side down and duck tape them waiting to lower battery. missing a chunk out of my hood lol on the bottom so its ok ill try to get some...
he said this ^^^ of subject yes. i was up for a lil over 24hours. not realy trying to type the whole long a$$ story agine. cuzz so many ppl ask about my screen name thinking im a girl. him being a dick and me already geting my ? answerd. (thanks) makes me think that writing all that is a...
any one know if there having a fwd class this year. last i read there not but they said if they had 25-50ppl pre pay then they would run the fwd class i hoping so. i would have prepayed but i dont have paypal sucks. o well ill just be happy to make it there.
ok thanks tim i finely geting my talon out for summer didnt have much time over this cold ass ohio winter shit sucked but im thinking about just geting slicks