JackStieben
Proven Member
- 200
- 21
- Feb 11, 2014
-
San Antonio,
Texas
So I replaced the 3 PS hoses and the pump after one of the hoses blew and I had to drive with a fluid-less pump for a while. (It was the original pump and needed a replacement anyways). Well I did all that and I bled the system. I have tried every way. wheels on ground with car off, wheels on ground with car on, wheels off ground car on, wheels off ground car off, I've made the wheel go from lock to lock, I've even made sure I didn't quite hit the lock. Every single way I have read here or dsmtalk and my steering still isn't 100%. There are no more bubbles that come out of the system. I took it for a drive and I noticed that my steering became easier the higher the engine RPMs were, (faster the pump is spinning?) Steering isn't difficult except for turning from a stop. Any reason why it's doing this? Or did I do something wrong? I have no leaks. I've check all over. cooler, steering rack, pump, reservoir, hoses, etc. Nothing. Any help is greatly appreciated. I'm trying not to take it to a shop.