Ok. Long post: been super busy with life and the car. So, motor is in. Trans is in. Timing belt is on. Fueltech and interior is wired and up and running. Been working on the engine harness. Getting the oil lines done. Missed my event that I...
Last nights post is an awesome one for the 2G chassis!I am still working on an arm but its not done yet. So i worked on a replacement bush for the oem arms which will rid the rubber in favor for a new alloy housing snd spherical bush!When you...
Another update! more to come to don't forget to come back and check them outThis one is about the Tubular Front subframes for the 2G DSM. I initially designed the customer version with a deeper brace due to feedback from exhaust systems being...
Another FIBA Friday and an OEM+ Product development UPDATE!From test prints to revisions then more revisions to the final print. Things have moved a long way for these, Which are NOW APPROVED as complete from test fitting.Some of you will...
I have read the entire thread and it is exciting, truly congratulations on the entire process of the car and the family, a lot of perseverance and dedication, that is how you reach success and you have achieved it. That's what staying strong and...
GridLife Circuit Legends at Lime Rock:What a weekend. This is going to be a long post for sure. So grab a snack LOL.Got to Lime Rock Thursday evening. Had to wait about an hour to get in cause it was just packed. Unloaded, and got to work...
Alright. Recap of GridLife New Jersey. We arrived Friday evening, unloaded and started getting set up for the weekend. We tried to do some vinyl on the car but it failed. A nice low key evening. Saturday morning was the same old. Drivers meeting...
NJMP next weekend. Car is pretty much ready to go. But….got a new toe rig! Please welcome my new to me, 2019 GMC Yukon! It’s so nice! Definitely the nicest vehicle I’ve ever owned!! Now I can tow with AC and comfort. And the tow package for this...
Dyno session the other day. Went well. We weren’t looking for numbers, but more so to try and figure out the throttling issue we had at the Glen. Ken at Black Sheep Tuning was linked in, remote tuning the car and I think we got it figured out...
Not too much progress over the long weekend. Had a lot of family obligations to attend to, so hopefully getting back to the car today after work. Have to mount the circuit breaker for the EPS, and go full bore into mounting the surge tank and...
We have the splitter pucks on there to keep the splitter from sealing completely to the track and stalling. This was also the first time out with the new suspension, so still in the process of getting it all setup right. The got a little lower so...
I truly hope to be able to be next to you in a pits one day with our cars. It keeps me motivated when I am feeling so overwhelmed. Keep it up dude and good luck at the next event!