The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

For Sale Turbo stuff, spyder stuff, other stuff.

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dustyboner

DSM Wiseman
1,946
1,083
Mar 13, 2016
abq, New_Mexico
If you want anything, make me an offer.

click images for full size

EVO III GT compressor housing:
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.


wastegate actuator off the same turbo (evo 3 gt)
You must be logged in to view this image or video.


ported 2g O2 housing, part# MR188004:
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.


(2gnt) New bosch front O2 sensor, part# 133399:
You must be logged in to view this image or video.


(2g turbo) New denso front O2 sensor, part# 234-4026:
You must be logged in to view this image or video.
You must be logged in to view this image or video.


1g BOV with pipe:
You must be logged in to view this image or video.
You must be logged in to view this image or video.


Spyder 4g64 oil pan (can be used with 2g turbo but must have hole for oil drain drilled and flange added)
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
used holset oil drain tube (11"). the 2 flanges are included unless you don't want them. they have been opened up to fit the end of the drain. I will also throw in 2 sticks of silver solder if you want them to attach the flanges to the end of the tube (acid based stainless steel soldering flux will be needed to silver solder the tube to the flange).
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.


10an SS hose for oil drain. i have 15ft or so, will cut to any length.
You must be logged in to view this image or video.


10AN Flare Male to 1/2"NPT Adapter Fittings. I have around 20
You must be logged in to view this image or video.


(98-99 4g64) NEW in sealed plastic. Genuine mitsubishi TPS, part# MD614772 (2 available)
You must be logged in to view this image or video.


machined 3" to 4" v-band adapter, 6 bolt turbine outlet, V-band clamp included.
(I payed around $200 for the adapter and the clamp)
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.


1/2 sleeving, black vinyl coated fiberglass sleeving. rated to 130 °Celsius (266 °Fahrenheit). I have 40-50 ft.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top