The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

1G Need some help boys....

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SasaniFab

Proven Member
2,433
782
Dec 1, 2013
Mexico, Connecticut
I swapped the trans and the car idles and shifts great. The problem starts when the car gets into boost, it acts like its in clutch cut..... it wont exceed a set rpm. This is in every gear. My first thought is map sensor but....?
 
Last edited by a moderator:
So when I took the car out the first time I forgot to install the speedo cable. I reinstalled the speedo cable but havent taken the car out yet. Id im in neutral and rev the car , it acts like its in clutch cut.
 
Last edited:
So when I took the car out the first time I forgot to install the speedo cable. I reinstalled the speedo cable but havent taken the car out yet. Id im in neutral and rev the car , it acts like its in clutch cut.
Link does the launch rpm cut by vehicle speed. I have mine set at 1mph. AnythIng under that and it uses my launch settings.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top