The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support Morrison Fabrication

Mbc install help locally

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I'm still using a t25, I've used a tee between the waste gate and compressor and from the tee it goes to the mbc and from the mbc to the intake bypassing the boost sensor, failed, tried going from the compressor to the mbc then to the wastegate, failed... Needing help
 
Well the tee is dead wrong. And are you positive you have a good working mbc?

It's really simple, compressor nipple to bottom mbc port, mbc horizontal port to wastegate actuator, also you could make sire your wastegate flapper is shutting all the way when in boost.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top