The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Register Log in
Please Support RTM Racing
Please Support ExtremePSI

wastegate

  1. Elpizer2

    2G External wastegate 38mm oem 2g exhaust manifold

    Hi guysI would like to delete the internal wastegate of my 14b turbo. I have a 2g exhaust manifold.I've been researching and I see 2 options.1- Weld on the longest tube of the exhaust manifoldI don't like this one because I know it has to be where the 4 tubes are toguether2- Weld it...
    • Elpizer2
    • Thread
    • external wastegate o2 housing external wastegate fitment fan cut wastegate
    • Replies: 6
    • Forum: Bolt-on Tech
  2. Anfurnyy

    1G Nylon Push lock Line heat protection

    Not really dsm specific but Im looking to run some Nylon pushlock for my wastegate and boost control however the line that runs from the turbo to the wastegate seems a little too close to the manifold. If anyone else is using these what are you guys using to protect the nylon tubing from the...
  3. llxkevinxll

    WGDC Requirement Higher After Raising WG Spring Pressure

    Hi All,Over this past winter I swapped the spring set in my Tial-MVR from ~10 psi of spring to ~20 psi of spring. After doing that, I have found that I require a lot more WGDC command to get similar boost levels. Nothing else changed in the system other than this spring change. Same turbo...
  4. Will Kellermann

    2G Wastegate Actuator Not Opening Until Like 25psi

    Hey everybody,The issue I am running into is that the turbo will not stop building boost as I can get to 20+ psi levels (I stop accelerating when it hits around 14lbs to be safe). I have a Evo 3 Big 16g TD05H installed on my '95 2G DSM. I don't know the internal wastegate brand/model and it is...
  5. GReddy TD05H 18G
    Sold

    For sale 4G63 GReddy TD05H 18G

    Bought it and was going to use it with an external wastegate but ended up going with a 68 HTA that I found at a good price. Turbo was rebuilt and has brand new internals no shaft play need the money for an unexpected emergency so it's priced to sell quick. Comes with wastegate actuator but not...
    $200.00
  6. External wastegate housing
    Sold

    For sale External wastegate housing

    38 mm external wastegate housing with 2 bolt tial wastgate, bought as a spare used and never ran it. looks to be in good condition. Selling "as is" paypal only. $300 shipped and paypaled
    $280.00
  7. Geeb

    For Sale Tial F38 wastegate (silver) with 3 springs and 44mm adapter 75$

    Tial f38 wastegate, comes with 3 springs - large blue, small blue, and large greenComes with 44mm adapter75$Call/text at 2159838091
  8. rj uhrina

    2G Trying to get more power out of a stock 1995 Mitsubishi Eclipse GSX.

    I’ve been doing a lot of research. So I believe if I have this right, the stock turbo is an internal actuator setup. So that being said how would I be able to run more boost, because from what I’ve read you can only reach around 12 psi. I have a HKS SQV 4 BOV, and a turbo smart manual boost...
  9. mky101

    For Sale Lot of aftermarket parts!

    Bunch of left over parts and parts from a car I parted out. All prices do NOT include shipping!I have a 20g turbo externally gated. Can sell manifold turbos and precision 39mm wastegate with dump pipe all together - $600. 2 tial 38mm wastegates silver. Minor cosmetic scratches perfect...
  10. blujeans

    Sold TD05/TD04 wastegate actuator

    Selling a wastegate actuator with its rod. Used on a TD04 13G. Besides the usual grime it appears to be undamaged and had no issues with it when I had the 13G installed on my car. Selling for $25 CAD, buyer pays shipping.
  11. Mokkan

    1G Wastegate gone bad?

    So, about a year ago, two (!) injectors went out on me and my turbo turned some pretty colors:It seemed to recover fine, no joints loosening or anything. Well, for the last couple of months, the car has been struggling to build boost. I found a boost leak, and had hoped to declare...
  12. nathansgsx

    2G O2 External Wastegate with AC Fan fitment

    To start off i’m sorry if someone has already answered this before, i have read many many posts by now and none really answer my questions or atleast I haven’t found one that does.Now for the question. I want to run the Punishment O2 External wastegate dump or the STM with the tial 38mm...
  13. Geeb

    Lets talk wastegate spring pressures for a second..

    So I'm going to be running a F38, on a PTE 6165, I'm looking to get about 550-600hp so I'm shooting for about 32-34ish psiI have a large green spring, a large blue spring, and a small blue springSM blue- 8.7 psi LG green- 13 psi LG blue- 14.5 psi Blue combo- 23.2 psiSomeone told me to run...
    • Geeb
    • Thread
    • f38 mvr mvs pressure pressures spring wastegate
    • Replies: 5
    • Forum: Turbo System Tech

  14. Sold New MAPerformance SS Exhaust Manifold, O2 Housing and TurboSmart Wastegate

    I'm officially getting out of the DSM world, do not have the time anymore with two young children. I have pretty much any part you can think of so please let me know if you have a specific part(s) need.Here for sale are a brand new, never used:1) MA Performance 304 SS T3 Tubular Exhaust...
  15. ShockDSM

    For Sale 0 miles SlowBoy TDO6H 20g DSM TURBO

    $275 shipped!Super nice 0 miles professionally freshly rebuilt TDO6H 20g dsm turbo. The wastegate plug has been removed for an external wastegate on the o2 housing setup to be used or plug the flapper hole and run an external wastegate on the manifold. (o2 housing pictured not for sale) Paid...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top