Hello guys I am getting ready to order the last parts I need to get started on my 99 GSX turbo upgrade.For reference this is what I have done already.
-Boost Gauge, A/F gauge, oil pressure gauge
-HKS catback exhaust
- 1g BOV
- Injen intake
- Boost Control Solenoid delete.Parts I am planning...
Hello this might be a stupid question but would it be possible to wire some 4G63 Fans onto a 420a?For reference this is the fan i want to wire/install.
Hey guys I’ve been trying to find a AWD DSM for years and I finally did after many attempts!I’m kinda scared to take this thing out without a professional tune and some good advice! I bought a 97 Talon TSi with a 1g long-block. Here is all the mods in the picture from who I bought it from was...
Hey everyone I was wondering if there was anyone in El Paso, Texas that could help me out I just bought my first DSM. It's a 96 GS-T. I have been trying different things and can't seem to get it running right. I'd really appreciate if anyone could lend a hand.
So my car blew a clutch (ACT2600) a while back. (pressure plate fingers blew off, and disc was worn)I Removed the transmission and installed a new ACT 2600 sprung hub 6 puck assembly. I also installed a new Slave cylinder, Clutch fork, and throw out bearing w/clip. I then bled my clutch many...
Hello my name is Ross and thank you all for allowing me to join! I'm looking forward to learn from you all.My first car was a 91 Eagle Talon FWD non turbo back in 2004, I owned it for a year but it spent more time in the shop than on the road so I had to part with it. Still, after 18 years I...
Hey guys just hoping to get some insight on tuning.
I have a 91 eagle talon with a fully built block and 20g turbo, ecm link v3 with some other goodies but a STOCK transmission and drivetrain.What’s a good launch limit for a stock trans? I really don’t want to have to put a new transfer case...
Hi, broke my ECT connector and need the car running asap. I was thinking that I could stop by the local junkyard but the only engines they have there are the 420a. Not sure if the ECT connector is the same.If any wiseman of the 420A could help a fellow DSM friend out.
Hi does anyone know how to remove ECT sensor pins, one of my pin wires got snagged and ripped off. :(I’m trying to just reattach new wire to it and just connect it.
What's up DSM Tuners people,My name is Manny, 24 years old from Miami. I had a shitbox '96 RS a few years ago and had to turn it in due to electrical problems that I didnt know anything about. Sold it for $750.In June 2021, I bought a '97 GS-T. I wish I knew more about the vehicle but I...
I have decided to embark on the journey of turboing my 4g64 spyder gs. I was curious since I live in California emissions are stricter, will a turboed 4g64 fail emissions? I know that you can't touch anything pre cat or something like that but if I take most of the stock parts from a 63T like...
Hi I did my first head gasket change on my 4g64 98 Eclipse Spyder and when starting and putting coolant in it still has air bubbles and white smoke vapor from exhaust manifold. When first starting there was a lot of foam but went away on its own. The car runs and idles fine at operating...
Hey all! I am a newbie on these forums, and also new under the car. Got my first DSM (a ‘95 Talon AWD 5-speed) being shipped here at the moment, so I’m tying to collect as much info about maintenance as I can so I know what to work on when it gets here.
To my knowledge, seals and hoses have been...
I’m new to a lot of things here.
First time Mitsubishi owner.
First project car.
First post.
Little mechanical skill.
Lots of acquired mechanics tools.What I have recently bought: 1998 GSX automatic, doesn’t run, good amount of rust. I paid less thank $2k.My story: I’ve always had an eye for...
I have always wanted to buy a project car and I have come to the point in my life where I’m ready to get hands deep in something. I have worked on older carbureted cars before like Camaros and Chevelles with my dad when I was a kid but now I want to start something with my children and I have...
Hey guys! First time creating a post, im new to all of this. I live in FL and 2 days ago I managed to get my hands on a 1995 GST with 114k Miles for 800$ was it worth it? It had a bit of a head gasket leak, so I decided to remove to do a whole basic engine rebuild, I want to keep it stock right...
Hey there,I’m Marcos and I finally got a DSM. I’m originally from California and thought I would be able to get a hold of one there but couldn’t find the right one for the right price. Eventually I moved to South Dakota and found one here. I have a 97 Talon TSi. I purchased it for $3.5K with...
I’ve been on this sight for a while but I never came around to creating an account but since now that I have I have many questions that will help me build the car that’s I fell in love with so many years ago.
So I'm going to meet this guy tonight, he has a a 2g eclipse GS-T Spyder. What are some things to know and look for? I will take literally any advice. It has 110k miles, a brand new 5 speed manual with 6 puck clutch and an unknown turbo
I am new to this forum and have been looking at joining for a bit now. I dont own a DSM yet but i will be looking at buying a motor. I have been looking at stroker kits and bored over pistons for the 420a. I havent been looking at 4g's because i am scared how much a block might be(i live in...
So, I'm planning on buying a bone stock (and when I say bone I mean completely stock even the paint) I've done some research and have found that I should do a full flush of almost all liquids, new spark plugs, new fuel filter, oil change, and new injectors. Is there anything else I should do...
I finally found a dsm in El Paso worth getting into, 1990 Mits Eclipse GS 4g63t standard. I brought it home and started diagnosing the car and replaced fuel pump, cause power was there but pump doesn't turn on, that's done I'm getting fuel but now the car still doesn't fire up. I have spark but...
First test drive of my 96 GSX was great but theres a couple things i cant find answers for, first of all i loosened my bov so i could adjust it and make sure its functioning properly like always but for the first time the adjuster got blown out, granted it was soft af but snugged in place, yes...
I just bought my first DSM, a 1997 Eagle Talon TSi AWD and am looking for a general sense of what I should tackle first in starting to throw money towards it. The previous owner has already started modifying it so I wanted some knowledge on what parts I should upgrade in addition to some...
So I recently bought what I think is a 95 eclipse gst with a seized motor ..i think I got a 4g63 motor. What are my best options to Do.. either tear down motor and try to salvage what I can or find same donor motor
Hi all!!! My name is Sadie, I am not entirely a newbie but new to doing the projects myself. I am tired of spending $300 every time something needs fixed. I have a 1997 Mitsubishi Eclipse gst. I have already had to have a new transmission, new engine, 16g turbo, cat delete, probably other things...
ok so, knock now doesn’t seem to be a problem did multiple full boost/ full rpm range pulls and cel never even flashed. Now after I started my car this morning after Installing ECMLink last night the check engine light is on for a injector circuit malfunction on cylinder two. Could this be...
ok so I have just installed ecmlink v3 in my car and decide to take it for a ride and make sure everything is good. Driving it around and pretty early the check engine light flashes while moving and I’m aware that it will flash after 5 degrees knock. So I data logged and it knocked all the way...
ever since I did a turbo back my car has fuel cut when I go wot but it isn’t consistently doing it but if I punch it, it will fuel cut bad. Could the exhaust be causing this? My car also doesn’t have a stock air box it’s just the stock intake tube to the maf to a filter. Could this also be...
so I’m buying a 2g gs from a guy in my area. I’ve been in love with these cars since I was a kid because of the build my dad had. It’s 200 dollars. Reverse gear is out so I’m either gonna do a trans rebuild or drop a manual in it since it’s an automatic. 190,000 miles. Guy said he bout it off a...