The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Register Log in
Please Support JNZ Tuning
Please Support Morrison Fabrication

exhaust

  1. 420A Need somewhere to buy new stainless steel exhaust for my 1997 eclipse rs 2.0 non-turbo, 1966 cc

    I have a 1997 Mitsubishi Eclipse 2.0L non-turbo , naturally aspirated, 1996 cc motor that needs a new set of headers. It currently has a 4-1 set up, I think maybe a 4-2-1 set up would be better? (yes?) I think I want to go with stainless steel and then send them out to Jet-Hot to ceramic coat...
  2. Sotarts

    What is this complete exhaust worth? 1G AWD Thermal R&D

    Looking to sell, but need to come up with a reasonable price.Thermal R&D 3" SS with high-flow catalytic and test-pipe. Was fitted to a '90 AWD with stock turbo / 02 housing. Sounds like a boss with stock turbo @ 18pounds. Been sitting in garage on the car for 10+yrs in a garage. Pulled off...
  3. LSM

    2G Will a 3" 2G AWD catback exhaust fit on a 2G FWD vehicle?

    I am currently selling a 3" SR.S catback exhaust off of my '97 AWD. I was thinking about it a couple of nights ago and realized that, if I remember correctly, a 2G AWD catback exhaust will fit on a 2G FWD vehicle fairly easily, but a 2G FWD catback exhaust will not fit on a 2G AWD vehicle, due...
    • LSM
    • Thread
    • 3" catback 3" exhaust 3" sr.5 catback 3" sr.5 exhaust catback catback exhaust exhaust sr.5 catback sr.5 exhaust
    • Replies: 5
    • Forum: Bolt-on Tech
  4. 2G DSM AWD SR.S Three Inch Cat-Back Exhaust For Sale
    Sold

    For sale 2g 2G DSM AWD SR.S Three Inch Cat-Back Exhaust For Sale

    I am selling the full exhaust that was on my 2G GSX when I bought it. It is an SRS 3" Cat-back, with the cat deleted, 2 resonators, and it has a muffler as well. The whole thing is in very good condition, has no leaks or anything like that, it's solid!! The only reason I'm selling it is because...
    $225.00
    • LSM
    • Classified ad
    • 3 inch 3 inch exhaust awd exhaust cat-back catback exhaust muffler resonators
    • Discussion: 2
    • Category: DSM Parts Classifieds
  5. 1998 GSX OEM turbo-back exhaust
    Closed

    For sale 1998 GSX OEM turbo-back exhaust

    1998 GSX OEM turbo-back exhaust for sale, nothing is wrong with it except needs cleaned. I just don’t need it. I have all of the hangers that come off of the car also. Just make me an offer. Located in blountsville Alabama
    $1.00
  6. 141Comet

    2G Euro Eclipse 2G, need explaination regarding engine component, muffler and intake

    Hello, hope everyone is having a great day!So basically, I have owned my Eclipse GS for aprox 3 months. It has been fun so far and I did all the required maintenence and more...New spark plugs, new radiator hoses (namely silicone HPS ones, cuz why not), valve cover gasket, belts, termostat...
    • 141Comet
    • Thread
    • beginner eclipse 2g exhaust help intake performance
    • Replies: 4
    • Forum: Newbie Forum
  7. T'd Up Steve

    What should I run for my GSX stock?

    Hey guys forgive me if this has been asked a million times but I am a brand new DSM’r and don’t know what to run and what alot of stuff even means on cars. So far I have a clean stock 99 5 speed GSX with little mods. Right now I want to run a stock setup but want to build up in the future. I am...
  8. OneYoungBoi

    420A Header choices for 420a Eclipse in 2023?

    just wondering what choices there are for headers in 2023 since these other threads are from the 2000-10's. I plan on getting a new exhaust system but its going to be a cat back and I want to replace my factory headers as well.
  9. CertifiedBot

    2G Exhaust questions for GSX

    I have a 95 GSX and have been working to get it running.I had to drop the tank and realized the exhaust is going to need a new flex pipe and the muffler is welded to the car, not on a hanger. I’d like to fix the muffler hanger and mount it correctly, and I think I’m going to put 2 v clamps on...

  10. DSM 4G63T exhaust system, tube size and length of down pipe and exhaust

    Hi there, I'm working on a dsm 4g63 which I made a 1.5" headers and installed GT25 turbo (2" turbine, beside waste gate). I have made 2.5" downpipe for that. Now I need to know how much should be 2.5" downpipe length and after downpipe what tube size should I use for remain exhaust system (2" or...
    • RSS
    • Thread
    • 4g63 downpipe dsm exhaust exhaust manifold gt25 tube turbo
    • Replies: 0
    • Forum: Turbo System Tech
  11. XC92

    1G Questions about painting entire exhaust system

    I'm going to be removing, cleaning, derusting & painting the entire exhaust system on my Talon, from the exhaust manifold & heat shields, to the entire exhaust pipe including the cat, muffler & tailpipes, and the cat heat shield.I was just wondering how high a temp paint I need for the various...
  12. XC92

    1G Quick questions on replacing exhaust & turbo bolts & studs

    I've been having rough idling issues on my 30 year old Talon TSi so I'm taking everything apart on the intake, fuel rail & exhaust, cleaning everything and painting where called for, and replacing all the gaskets, o-rings, bolts, studs, washers & nuts, along with the vacuum lines. Probably...
  13. 2G AWD RRE High-Flow Cat, OEM downpipe, OEM-style catback exhaust *Best Offer*
    Sold

    For sale 2g 2G AWD RRE High-Flow Cat, OEM downpipe, OEM-style catback exhaust *Best Offer*

    Hey everyone, Did some recent spring cleaning and getting rid of exhaust items (all from my old 2G 1999 GSX AWD): 1) RRE High-flow cat (hi-flo cat): 3 inches. Excellent condition. Used it to pass smog, and opted to not run a cat. 2) OEM downpipe. Good condition. 3) OEM style cat-back exhaust...
    $100.00

  14. 1G 1991 Eclipse GS 2.0NT Catback options

    I own a 1991 Eclipse GS and have been wanting a nice-sounding and good performance Catback, and after some research, I've found almost nothing for the 1G FWD Eclipse GS. I've read throughout the forums and have seen some people get custom exhausts or just simply buy tubbing and smacking a...
  15. DavidJamesDSM

    Exhaust Options in 2022

    My question to my fellow DSM'ers that didn't get their hands on the holy R&D exhaust is which is better in your opinions: HKS Hi-Power catback or the STM catback exhaust system?
  16. GHSTII
    Closed

    Wanted GT Spec 3 Downpipe for a 2G

    Anyone got an Apexi GT Spec 3 Downpipe for a 2G? Apparently they’re out of stock everywhere.

  17. 1G Will a 2.0L exhaust fit a 1.8l (everything except the exhaust manifold)

    I have a base model 1991 eclipse with a 1.8l that needs the entire exhaust system except the manifold. And in normal 1.8l nature there are no parts that specifically say 1.8l fit. But there are plenty that say it would fit a 2.0l. So I was wondering if I could use the 2.0l exhaust.
  18. GHSTII

    2G Hot Parts for '98 GSX?

    Not finding a lot of options on this one. I've already been asking around, and I may have a couple leads, but I figured I'd ask in a thread anyway.Any leads on where I can find a Hot Parts kit? Still learning how it all pieces together in the grand scheme of things, but I am seeing some wild...
    • GHSTII
    • Thread
    • 2g eclipse 98 gsx dsm exhaust hot parts intake manifold turbo turbo 20g
    • Replies: 18
    • Forum: Bolt-on Tech
  19. GSXRunner

    2G Recommendations for cat replacement

    Hi,I installed a 3" SS catback on my GSX a couple of years ago. The stock downpipe was still in good condition so I bought a new stock cat and used an adapter to connect the 2.25" cat to the 3" catback. However, now my downpipe is falling apart and the holes too big to plug up, so I need to...
  20. all black 4G63

    1G MeganRacing 3" exhaust for 1G AWD

    Im in the process of purchasing a complete MeganRacing 3" exhaust for my 1G, but I was just wondering if anyone could assist me in identifying the pieces in the attached photo. It shows 5 pieces.The down pipe, the resonator, the CAT back pipe and muffler. The pipe in the photo I am confused...

  21. 420A Mufflers/cat-back for a 420A?

    Hi tuners. I have a 97 Eclipse RS and I'm planning on changing the exhaust so I can get a little bit louder. I read a lot about this, and I know that 420A models tend to sound ricer if you do a straight pipe since they are non turbo. Do you guys know a good setup for a muffler/cat-back that...
  22. blujeans

    Sold 13G/automatic exhaust manifold

    Don't need this manifold anymore as I've upgraded to a TD05H. Didn't find any cracks after inspecting it. $40 USD, willing to ship from Alberta, Canada at buyer's expense.

  23. For Sale WTB: 2G FWD Apexi N1 exhaust

    If anyone has an Apexi N1 catback exhaust for a 2G FWD (GST/TSI), I’d like to buy it ASAP. Will pay shipping if need be.

  24. For Sale 2G New Parts for Sale. Exhaust, Intake

    I used to have a 1999 Eclipse GS-T and purchased several items as a performance upgrade. Unfortunately, the parts never made it on the car, I have since sold the car, and the parts have been sitting in my parent's garage. I am hoping to sell everything together, preferably local but willing to...
    • Cars4Kix
    • Thread
    • 1999 mitsubishi eclipse gs-t 2nd generation buscher racing downpipe exhaust greddy injen intake turbo upgrade
    • Replies: 0
    • Forum: 4G63 DSM Parts for Sale
  25. ulitka

    For Sale Garage sale 2G GSX performance parts

    Parting out 98 GSX Eclipse. It was a project weekend car. I will be adding more parts to this thread.Prices include paypal fees. Prices do not include shipping. Shipping to Canada, HI, PR will cost extra.1. ECM Link V3 speed density. SOLD!!! - EPROM ECU was purchased from ECM - GM IAT, 4-bar...
    • ulitka
    • Thread
    • boomba corbeau exhaust fuel injectors fuel pressure regulator fuel pump fuel rail manifold snow perfomance turbo
    • Replies: 8
    • Forum: 4G63 DSM Parts for Sale
  26. Brembo

    1G Need exhaust. Need advice. Come on in and join a discussion.

    I just put back my dsm back on the road after about 2 years of being under a knife. I have successfully did 4 wheel evo brembo swap on all 4 corners and during that time and my exhaust completely has rusted awey. I will tell you more the muffler completely has fallen off. I was so excited to...
  27. Jonnychance

    420A New exhaust system

    Its from header back with a cat delete bolt in. It's a spec-d with a DC sports muffler is it worth the 150+shipping
  28. nathansgsx

    For Sale Side exit and HKS Exhaust

    For sale i have a BSFAB 2.5” Side exit exhaust this will require you to cut a hole in your bumper. The exhaust has already been heat wrapped -$200I also have a HKS Hi-Power catback exhaust this is a direct bolt on no modifcation to flanges required $300 I am willing to ship but buyer pays...
  29. Jeff D Desantis

    2G Most Bad A$$ sounding exhaust for 1998 eclipse gst

    Looking to get a new turbo back exhaust, and want something mean sounding but not ricey sounding. Anyone give me some ideas and links to buy them?
  30. Matts_talon

    Full 3” exhaust turbo back and car eliminating

    does anyone know where i can get a full exhaust system from the turbo bakc that’s 3 inch?? I’ve been looking for a while and haven’t found anything, and i don’t really want to go full custom. Any help at all will help a lot, thanks.
  31. DSM_15_2G

    2G Upgrading the exhaust (Pros/Cons) Custom

    Hey everyone,I'm starting the new thread because I didn't find anything similar to my state. Basically I own a 99' Mitsubishi Eclipse GS (European 4g63 7 bolt). I plan on turboing the car this month or the next (depending when I gather all the parts needed). I've planned on going all stock...
  32. mrc_wkr

    1G GST Catback Exhaust (1gb)

    I have been searching for a catback exhaust for my new (to me) '94 Tsi (FWD) but the pickings seem to be very slim. So far all I have found is Thermal Research & Development 3" Catback and CXRacing 3" catback. My car only came with a stainless downpipe so i know i will also need to get the test...
  33. Anthony Boni

    Turbo flange?

    Hello!After some google searching with little help and no difinitive answer, I could use some help. I’m not sure if my turbo is a T4 or a T3 flange and I don’t want to order a gasket for it before I know. Below is some information I’ve found with a picture and measurements of “basic” T3 and T4...
  34. ZergBush

    Showcar Build project EvoCLIPSE | EVOLUTION inside ECLIPSE (mivec engine, awd swap)

    PART 1: - Installing rear Mitsubishi Legnum AWD transmission - Install brake and fuel line - Setting Legnum all-wheel drive fuel tank - Engine mounting Mitsubishi Evolution IX mivec 4g63 and all-wheel drive EVO9 powertrain
    • ZergBush
    • Thread
    • awd eclipse evoclipse evolution exhaust gs to gsx intake interior mivec swap
    • Replies: 7
    • Forum: DSM Build Journals
  35. Shooty

    Bought a used FP manifold...

    As the title says, I bought a used fp manifold and to my surprise when I received it, it had some cutting done to it to clear the bolts and washer I suppose. I've linked some picturesI was wondering if it the cuts were too deep that would cause some cracking over time or else... The runners...
  36. ShockDSM

    For Sale 0 miles SlowBoy TDO6H 20g DSM TURBO

    $275 shipped!Super nice 0 miles professionally freshly rebuilt TDO6H 20g dsm turbo. The wastegate plug has been removed for an external wastegate on the o2 housing setup to be used or plug the flapper hole and run an external wastegate on the manifold. (o2 housing pictured not for sale) Paid...
  37. Chumpaumpalumpa

    For Sale Genuine Apexi N1

    Selling my real APEXi N1 cat back exhaust system. It's 2-1/2 inch to a 4 inch tip. This exhaust gives a nice throaty deep growl. But you already knew that. Comes with new gaskets and all hardware including hangers and bolts to make it as simple an install as possible. Fits all 1G AWD DSMs...
  38. STM tuned

    STM 2G AWD DSM Stainless Steel Cat-Back Exhausts IN STOCK !

    We have our STM 2G AWD Stainless Cat Backs in stock, ready to ship!There isn't a better exhaust for Quality and price out there! They are fabricated in house at our location, and now in stock and ready to ship!$599 !-BrianFeatures: - Weighs 19.7 pounds - Factory cat-back weighs 37 pounds...
    • STM tuned
    • Thread
    • 2gawd cat-back catback exhaust stm stmtuned
    • Replies: 31
    • Forum: STM Tuned
  39. Caleb4G63

    1G Rebuild engine, won’t turn over.

    So, I rebuilt my engine, when I pulled it, it ran fine besides the engine having less than 80psi compression. Getting to he point, when I turn the key to the on position, I get dash lights, can use blinkers, but I can not use hazards, or turn on any interior lights or headlamps. Tail lamps do...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top