Hello!
I'm new here so if this problem is already discussed I'm sorry. I did do a lot of research but still couldn't figure it out.Okay so the problem is this, I have a 1998 Eclipse that has spark and compression but no fuel. There is pressure in the rails but its not coming out of the...
Hey guys, i have an AUTOMATIC 420a. Im planning on boosting it with 7 psi. My question is Can I tune my automatic eclipse after turbo install ? Do I need to tune it? How do I tune it?
Parting out my 95 eclipse gsx life hit me bad and since the car isn't put back together I have no choice but to sell the parts. I have many many parts I've stockpiled over the years so whatever you may need ask. If you'd like the car with the subframes and rear diff/gas tank ill cut you a deal...
Standalone folks, care to share your setup? What was the most effective way to get your alternator to charge without the stock charge light?
FuelTech FT550 here.
Looking for the tail light center piece for a 2G Eclipse.The middle piece that says "Eclipse" in between the tail lights.I don't think it matters between 2GA and 2GB or between Coupe or Spyder, but it is for a 2GA (1996) Spyder GS-T.Thank you
I'm in search for blue cloth seats which are not easy to find. Every junkyard I've contacted doesn't allow you to pull the parts and they won't sell. 95 and 96 model years from the eclipse and maybe the talons had them to. If you'd like to sell I'm interested. I'm trying to keep the original...
I need everyone's thoughts on these aftermarket sideskirts. I have stock ones but someone welded up every single hole in the doors and rockers. I don't want to drill the holes back out. If anyone has seen these aftermarket sideskirts in action I'd like to know how they sit. I don't want a set...
I am not the most wealthy person, but do not want to cheap out on any parts for this build. I have a few options here to choose from that are in my budget. I’d love to hear what everyone’s opinions are on these options or even better ones… here is some pics of my 99 gsx, bone stock refurbished...
I have a 420a engine I built myself it has wiseco pistons and eagle rods main and head studs.
It has maybe 50 miles on it. It's been sitting for over a year collecting dust.i do have videos of it running before I pulled it.
Decided to sell the EDM mirrors off of my parts car. The ones on my main car are fine so I'm putting these out there because they seem to be pretty desireable and I don't want to hold onto parts that people want more than I do.They are foldable and they have power functions. I've seen some in...
I found the part number for brand new headliner and I'd just like confirmation that this is what it actually is. I get spooked ordering things online that I don't know for sure is the actual part.https://www.mitsubishipartsnow.com/oem-parts/mitsubishi-headliner-mr707934MR707934
Hey folks,Figured I might as well make a thread about this. I've been combing through the forums and the Electrical Factory Service Manual to assess an issue I'm having. I'm posting it here in case anyone has any productive input they'd like to share, or in case it may become useful in the...
Hi! I’m new to the forum so be gentle lol
I have a 2g eclipse that’s a 4g64 block with 63 head. I install a new 190walbro fuel pump and it was working fine then all of a sudden the pump just wouldn’t shut off in the on position. I have changed the relays as one of them was not good. If anyone...
My dog chewed this up and I’m stuck not sure what my next step should be. This is the driver side where the turn Signal light is and all the wiring is.
I have some edm tail lights for sale. They have one crack on the right side but I sealed it so no water gets in. I was running them on my car but got tired of how they looked. $450 plus shipping.
I have a 1995 gst that I recently did a head gasket replacement and belt refresh on right after I bought the car. I have battling this squeal for awhile now, and need some help with the next step or any information to diagnose. I know this is probably the 10 thousandth question about a belt...
Well I ran into my first big issue with swapping from a 420a to 4g63. I swapped all the harnesses except the one one under the dash because i thought they were somewhat the same.everything plugged into everything the same. I don't know if this was a previous issue in the doner car or what. When...
Im looking into coils to lower my car and as far as my information has lead me Megan Racing Ez II are the best for the price, ive been looking at a couple sources to see how much they would cost, i noticed something odd when redline360 coils costed almost $100 dollars less than everywhere else...
I've read just about everything on the forums for this window trim, and I have no idea what it's actually called. Anyway Does anyone know the proper way to paint them or can a guy buy them somewhere in this day and age.
Not finding a lot of options on this one. I've already been asking around, and I may have a couple leads, but I figured I'd ask in a thread anyway.Any leads on where I can find a Hot Parts kit? Still learning how it all pieces together in the grand scheme of things, but I am seeing some wild...
As I've been looking into standalone ECUs, AEM constantly keeps coming up. I've got two questions:1. Are there any alternatives would you consider? I am familiar with Haltech, but I could use some additional insight.
2. Are all of them $2k? 😆 😆The important thing to note is that I need to...
This guide is for the OEM door handles and door checks with related parts for the North American 2nd generation Mitsubishi Eclipse and Eagle Talon.Disclaimer: this info may not be comprehensive or exhaustive, and may contain mistakes or errors. If you see a mistake or something missing, feel...
I´m new to car forums like this so bear with me, i looked for this topic before and didnt find anything so far, also while looking around on google and similar in general so im hopin someone here can give me a heads up.I bought a really cheap, great condition, 1996 pre-facelift...
I wanna keep this AS short AS POSSIBLE haha but give as much info to you guys reading it to further help me out, so here it goes.So last year in September I had issues with crank (cranks like any normal time, not slow like a dead battery) but no start. So I came on here and read a few forums...
Im installing a Fueltech 450 on my 1996 2G Eclipse GST. but i had a lot of problems with the MPI when i tried to connect the fuel pump, basicly i resolved it making a new instalation just for the fuel pump, and with the spark, i had a similar problem, i just made a complete new conexion with...
Hey guys so I'm looking for opinions on how I should proceed from anyone with experience with this. So to start I have a 2g eclipse with a 6-bolt swap. Currently being tuned, and were having a bit of an issue with the new ingersoll BCS. I cut the wires to the old BCS(old bcs was not plumbed) and...
First off hello and thanks for reading. I'm from a small dreary Kansas town where the classic Japanese sports car tuner culture I personally love so deeply may as well be extinct.For this reason I'm taking it upon myself to begin the revival by finally joining the ranks and purchasing a long...
hi guys ive been looking for an eclipse to buy for a while n I wanna learn how to work on it and tune it up n i was wondering if anyone in the ie oc or la county have a gsx or gst with good miles that they wanna sell if you got anything leave a number or lmk on here thank you
so i just bought a rolling shell from someone and they said it had a 4g63 with a turbo in it. now they are saying it might not have been a 4g63 and might have just been a gs. the engine is gone and all parts are striped is there any way i can tell from engine bay or anywhere on the body weather...
I've got a couple parts laying around that someone may be able to make use of so I figured I'd post them up.98 gst starter, was is working condition but I was doing everything new so I replaced it. - $30 + shipping2g shift manual shift linkage. I swapped mine out for a new one when I was...
owned since 2006, this is a project car. 169,000 miles manual transmission is good, Engine runs with no CELs but needs to be rebuilt or replaced. Has custom white and tan leather interior (2014), 2 Pioneer 6x9 3 way speakers(2014), cx300.4 series multi-channel Kicker amp(2014), 5.1 inch...
Quick history: i am 22 and own a 1995 talon tsi and a 1997 eclipse gst. i have been doing months of research and i am looking to mash them both together.My DSM story
6 months ago a coworker who has owned a 1995 eagle talon tsi for 20 years was having issues with her car so i took a look...
I have owned multiple DSMs and fell in love with this car and body style since I first saw the 2G Eclipse driven by Paul Walker in the first Fast and the Furious movie. While I enjoy these cars a lot, I recently purchased a new Nissan 370Z and have plans to upgrade that car. Unfortunately, I do...
I Have For Sale a OEM exedy clutch kit that i bought a couple months ago before i changed my goals and got a act 2600 BNIB comes with the disc, PP, TOB and centering tool. 110$ shipped any questions you can msg me here or text (509)853-7159 thanx.
Looking to buy a 2g talon tsi awd. Looking for something in average shape at worst and very little rust if any
Must have 97+ bumpers, A/C, heat and PS
Preferences would be big 2g talon wing, 6-bolt, adjustable suspension, tuning software/tuned.Really looking for the 97+ talon look with some...
I recently just replaced my clutch master, slave cylinder, and installed a ss clutch line to try and narrow down a problem i was having with my clutch slipping. Ended up being the clutch itself so fast forward installed a xtd Stage 2 Clutch got it all put together the other day and went to take...
I am currently missing part number - MD744671I need it to finish my conversion for my eclipse....Its an "adapter" for the tranny my mits dealer told meBelow are some pics
All, I am hoping for some help! I have been at this for two days straight and still have no solution. I bought my GSX originally with a short to ground that was blowing the ignition fuse. It was the noise capacitor, removed it, car started & ran, and had no parasitic draw originally (I tested...
Is anybody selling or know where I can find this part....I need it to finish my conversion from an auto to manual 2g eclipse spdyerMits said it they dont make it anymore.....the part number is MB936595, they call it an "Adapter Bracket"