Some of you may know I've been into the car audio scene for a while now and I've done a few pretty loud and elaborate installs. Well I just completed my most extensive install to date, and its in my Ram.For this install the goal was simple, to get the truck loud as fawk and look good doing...
Just posting up some pics and info on the recent 93 GSX I picked up. Only really bought it b/c it was so clean. It's currently fabbed and tuned by Tym Switzer but gradually it will be changing setups and fabbed/tuned by me.Current setup is as followed.AEM EMS (Changing over to ECMLink...
Sorry for the long post but bear with me as this it makes more sense as a whole stort.Hey all, 2 months ago my buddy bought a 92 awd 6 bolt. Basically he doesn't know much about cars and I am his DSM guru/ mechanic. I have done every bit of work and maintenance on the car. I have also been...
Just wanted to post some pics of my new summer toy, 06 Suzuki GSX-R750. Picked it up in Chicago this weekend, from the original owner, who never rode it. I picked it up with 293 virgin miles on it, for an unbelievable $6500.
Last night I turned the NLTS back on and set it to 5500, and its been working great from a 7200 shift point.Anyways I stomp on it in 1st and then shift it hard into 2nd. I shifted it really quick and hard. As I shifted into 3rd, something didn't feel right.The clutch pedal itself now...
Well today, I was going to go to TRE and have Jon check out my trans.I leave and head down the road and pull up to a stop sign and the car all of a sudden idles at about 2500 RPM. I'm like OK??? I get out and try adjusting the Biss, maybe it came loose? But no, it was nearly closed. I couldn't...
I just car my car up and running with my new trans rebuild from TRE. Its a 93 trans with 11% taller double syncro 1st, 10% taller 5th, stage 2 rebuild, 4 spider center diff. The clutch setup is a 2900 Pressure plate, and Clutch Net 6 puck sprung disk, and ACT flywheel stepped to .609. The fluid...
Here's a quick little writeup on how to properly wrap your tubular manifold.Parts needed
1 Roll of 1" x 50' Header wrap, I prefer to use DEI brand.
1 Pack of SS Locking Ties, Short (8 to a pack) DEI
1 Pack of SS Locking Ties, Long, (optional, 4 to a pack) DEI
1 Can of High Heat...
Hey guys. I recently got my Fidanza Short Shifter in and I am in the process of installing it but I am running into a problem. Im actually wondering if i was shorted a set of bushings/bearings from Fidanza. As you can see from the pics, the unit won't fit with the bushings, at all. Its like the...
I figured I'd post some pics and info regarding winter plans and fixes for the car. Like always little plans turn into big plans.Original plans for winter.
New turbo and manifold, add bosch 044 fuel pump, and adj cam gears, port oil fiter relief hole.Current plans for winter.
New turbo...
So I pulled my trans today so I can take it up to TRE and right as I was pulling it out and down the tranny mount "ear" on the block fell off. This is the rear "ear" on the block. It just fell off when I pulled the trans off. Searching on some forums most have this problem with the front "ear"...
Can anyone explain the ins and outs of adjusting Koni yellows? I just got my set in and I want to set them up properly but the only info that came with it I can't halfway understand. Do you have to remove the rears to adjust, etc?Thanks, Dan.
This will show you how to install the Dynamic Motorsports Engineering (DME) rear camber kit for 1g AWD's. This involves removing the upper rear control arm and replacing the bushing with this piece.The DME camber kit can be found here.http://www.dmotorsporte.com/prod01.htmFirst jack up...
Hey guys I've got some questions about which fuel pump I should be switching too, etc.Currently, the car has a walbro 255 hp with -6an full feed line, 950's, Aeromotive FPR, etc. The turbo is a PTE GT3561SP on a 2.3L.Originally, I had planned on simply adding in the Bosch 044 Fuel pump...
Anyone running this kit from DME? Looks to be a good alternative rather than buying a Ingalls kit for much for money. If you run it, how was the installation, etc. Overall quality, etc. Any info and specs you can give would be great.Thanks Dan.Here is a link...
Anyone run these? How do you like them? How is quality? How is overall ride on the street? Any problems with then? Would you buy them again? They have pretty decently stiff spring rates and drop 2.0".
Well I found some pics on the PC of me installing prothane mounts so I figured I'd post up a quick how to. I've used this method on a quite a few Prothane installs and it hasn't failed me yet, and its quick.Getting the mounts out of the car and back in is up to you, this just shows how to...
Well after blowing the seals in my last turbo (50 trim Turbonetics) I just picked up a PTE GT3561SP turbo. It uses Garrett internals and has a standard 360* Journal bearing system, not ball bearing.Anyways, I have concerns as to what the optimal oil pressure should be. I have heard that...
Hey all, anyone else have a 255 HP? If so, is it loud or quiet?I ask b/c I have a 190 in my 92 AWD, and its the usual Walbro whine. Loud, no rewire.However, I had a 255 HP in my 91 FWD w/out a sock and with and without a rewire I couldn't hear it.I now have the exact same 255 HP...
I'm wondering what is the correct way to hook up this kill switch. I mounted the batt in the rear and I can't come up with a solid answer. The instruction sheet that came with the switch states to run the switch with the engine/body ground, but I believe I read that NHRA rules require it to be...
I'm a 6 bolt guy and I'm helping a friend rebuild his 1g 7 bolt. I searched, but can't come up with the answer. I know 2g 7 bolts have 11mm head studs, but do 1g 7 bolts use 11 or 12mm studs? Thanks.
Hey all, I'll be shipping out a full 3" exhaust system for a 1g FWD, and I'm wondering if anyone knows in the ballpark of what the shipping charges will be. Its for a RNR 3" turboback for a 1g FWD with shipping from Lower Michigan to New Jersey or elsewhere. I don't know the weight.Thanks all.
I see one member on the DSMLink boards is parting out his car b/c it won't stop pushing coolant and I fear I'm on getting close to that road b/c I don't have or want to dump more money into this thing.Even after a new Mitsu MLS HG Wednesday, the car still pushes coolant out the overflow any...
Hey all, I fear I have a blown HG, or worse, a warped or cracked head, or cracking in the cylinder walls.The car is a new built 2.3L engine with just over 1100 miles on it. For the past 2-300 miles I've noticed the car pour coolant out of the overflow after some spirited, high boost...
I'm getting knock everywhere. Up and down, left and right, round and round. I honestly believe its a mechanical (noise) knock that the sensor is picking up but I desperately need help.First off, the knock sensor is about 1 year old, looks brand new and I have modified it, by welding the...
Hey all, I've had this TT for a while now, I bought it used and didn't get a user manual or anything. I have it all hooked up but the only thing I know how to do is run and adjust the TT functions, start and stop the stopwatch, and view voltage, but I know I can use it as a shift light as well...
Long story short I hit a tree stump in my buddies parking area at his house and its obviously f'ed up bad and its leaking. Rather than spending $600 on a new core that I don't have I've decided to weigh out all my options. Upon inspection I found I'm not able to weld the leaks shut as it'd be...
Alright guys here the deal.Wednesday I started the install of a SBR LSD insert in my 91 turbo FWD trans. Everything was going as planned until.... I remove the large gear on the stock diff which is held in by 8 19mm bolts. You remove this gear to gain access to the small pin that needs to...
Hey all, I have a question about the internal fin desing of water pumps. My question is about which is better, if one design is better then the other, that is.Take a look at the pics below. Notice the difference in the actual fins that pump the water?Picture 1 is of the type that has a...
I'm wondering if anyone here or anyone you know is running -6an SS lines for there external oil cooler setup. I have a few friends that have ran -8 and one or two that run -10 lines but is -6 enough? Reason asking is b/c I recently ran a full -6 SS fuel feed line in my car and I have approx 6-7...
I recently ordered a JMFabrication Polished Heat sheild for use on any 1g, 2g, EvoIII or SBR cast manifolds. I asked Jim to cut a provision for a Tial 38mm WG mounted on the #1 runner. He did an awesome job at it. The cut is very smooth. It also includes very nice allen head bolts for a secure...
Hey guys. Im trying to build a windows xp bootable cd folling the supplied link. I have everything set up the correct way. See, a LONG time ago this worked for me, files in SAME place, etc, so I know its still set up correctly. The problem I am having now is that everytime I try to run my...
Heres some pics of the progress of the DSM over the winter. Im mainly fixing some oil leaks, external WG, Prothanes, Axles, Flywheel, and some major cleaining. And a few other things, just have to wait and see. The Smirnoff really helps to pass the time, especially while porting!
Hope to hit...
The Drivetrain is not my highest area of knowledge so please review the state of my clutch please. I don't know really what to look for. It is a 6month old ACT 2100. I'm wanting to know whether or not it needs replaced or if you think it will take another year of street/strip use. Thanks for the...
Could someone make me a sig? Please? I would like to have these pics used in the sig, somehow, its up to you. And also have it say Project_TSi somehow too. Thank you guys very much for the help.Work that PhotoShop Magic!
I need a bumper Ps'd on my car. Please Ps a Talon bumper on it. I also would like a new paint job, nice shiney red but leave the hood black. Thanks for your help. I need the help b/c I'm trying to get into a magazine for the slicks ad but I need a bumper first and a painjob would def. help...
This is funny.So weve got this 02 Jeep Soft top that kinda looks like the one in the pic, you get the idea.
Anyways, anyone w/ a Jeep or w/ Jeep experience knows that a soft top Jeep can be un-zipped at anytime and you can get in. It just so happens that my step dad locked his keys in the...
Alright Im in need of help. 91 FWD. I recently Installed a set of Comp 101200 cams, similar to 272's, and now I have a ton of knock that I can not get rid of. As soon as I hit approx 18 psi the CEL goes off and never quits. My boost is set a 20 psi, but w/ internal gate it creeps to 25 but not...
Today at English Town John Shepherd ran a new record of 7.9 @ 179mph!
Congrats John!From Stands Videohttp://x602.putfile.com/videos/27502070626.movIn car vid.http://www.dsmtimes.org/shepherd/Shep%20in%20car%207.97@179%20E-town.wmv
Hey guys, besides my beloved DSM, I also own a 93 Suzuki RM 250 MX bike, and since I bought it 2 years ago, its always had a problem w/ not wanting to start when its cold. When it's warm it will start right up 1st or 2nd kick, but sometimes when it's cold I have to tow it, or get a push down my...
My axles are getting to the point of getting bad. Starting to click, clank, pop, etc. So I'm going to need new ones soon. Also I finally got my hands on a set of slicks for the track...
I will be pushing around 375 hp. Will stock axles hold up to the abuse that slicks will give them?For...
Looking to buy a set of Comp Cams #101200, Comp states they are close to HKS 272's. The reason I'm looking at these, is becasue I can get a set brand new for cheap. They will be going in a 1G.Questions.1. Hows the everyday driveability w/ these cams.
2. Did they make the car pull alot...
Were trying to get our biggest gathering yet to happen on Sat. Sept. 10. The meet will happen at the normal time of 4:30. The meet will be held on the South side beach (close to the skate park) b/c its set up much better for a meet. I can get you directions if needed, just PM me. So please, even...
Man, I am in dire need of slicks, or some serious help otherwise. I recently went to the track last weekend and I'm basically fed up w/ my times. My best was a 14.1 @106 mph. Mods are in profile. My 60' times are basically around 2.3-2.4 sec. My best trap speed was 107 mph that night. What...
I recently bought a Innovate wideband kit and need to install the 02 sensor in my downpipe. The sensor needs to be installed as far downstream as posible before the flex section. Im not the best welder so don't rag on me, I do my best and yes, it does seal.Step 1, pic 1: Start w/ your...
I recently bought a cheap 02 housing w/ dump for my car. The housing did not come w/ any bolts, nuts, studs or anything to connect it to my downpipe like the stock housing does. I also started getting sick and tired of having to use a socket and wrench to remove my down pipe, So heres what I...