Hi!
I bought a build transmission which is Jacks drag build with HD gears, 4 spider e.t.c has not been used since build..
I send it to Jack again for WPC and micropolish after opening the gearbox Jacks says that it has a single synchro and he can do double synchro 1-2 gears for 468$ extra.I...
Hi! I Want to buy some custom pulleys kit to my 1G but i need to know if its some difference vs 2g pulleys kit.
If i Buy 2g pulleys kit will that work in 1G ? I think about ALT pulley, Water pump , power steering. For Crank pulley i choose ATI
this one for example ...
Lets talk about **BOOSTIN PERFORMANCE 1990-99 DSM & EVO 1-3 MANUAL TRANSMISSION BILLET BEARING HOUSING** (DSM/EVO 1-3) Anyone have it installed ? How reliable is it ? What u guys think on it ...
Hello guys!
At this point I have VRSF 1g FMIC kit with is 2.5" pipping I guess
Is it a good idea to do 3" pipping with bigger IC will it change anything ?
hp goal :400-550
My setup:
Holset HX 35 in BEP.55 holset housing
FP Manifold
3" Full Exhaust system no cat
with 2,5" custom o2 housing...
Hello
I have 90TB and my FIAV oring is broken, I have huge boost leak around my TB.
Maybe you have any idea how I can solve this problem myself..
I dont want to buy new oring, I live in EU and shiping + customs is too expensvie for 6$ oring...
Hello!
I did boost leak test and right now I wonder why my HKS bov leak from this place ?Do u think, I can do some rubber gasket for this or maybe some RTV silicon ?( Its not knockoff BOV )
Hello weatherstrip sunroof seal ( I marked in the photo)
the seal is plastic or is just old ? because mine is very hard and is very easy to break it like in the picture.
Should this seal be soft ? I mean when car was brand new the seal was rubber and soft ?
Hello!
I would like to buy new dsm68hta turbo from FP.
My question is :
I think that TURBO requires oil feed from OFH. FP says that turbo does need a oil restrictor but I want to do BS removal and ofh porting because my oil pressure will definitely increase, so i dont know if i need to buy oil...
Hello!
Can i change stock IC and Piping to VRSF and exhaust to 2.5-3" without any ecu change, I mean do I need any ecu tunning or remapping?
Riding on stock ecu with bigger IC and piping and Exhaust does not affect the engine badly or something like that? (Idle bouncing, run rich or lean e.t.c.)
Hello, I need your opinion until i do real CAI for my car i want to do something better than stock one.
I this better than stock ? I dont want hot air in my sysytem. I know stock one is very restrective but still better than hot air?
I can only do something like that
Or leave it alone and wait...
Which is the best choice to my 1g 90 GSX transsmision: mix of Red Line MTL and MT90, MT85 ONLY or MT90 only ?
I live in Sweden so in winter reaches -20 degrees.
Hello I have one simple question, I want to do something like this with 2 catch cans
So i need check valve, can i use Fuel non return one way check valve like this ?
Or need to buy only this one recommended in the article ?
I'm from Sweden so its difficult to buy this recommended check valves.
Hello
I want to BYPASS my FIAV, no Block Off. I have a 90 TB, I know that i can close FIAV using free mod like here . So if i want to BYPASS my fiav I have to do it like on video ? I have to use a bypass plate also ?
Hello i want to set timming tomorrow and I saw this post
" Base Idle & Base Timing affect each other - IMO due to the weird ass angle we have to view the Marks from when you are squatting down & peeking thru the belts & "see" 5 BTDC you are really set at about 7 BTDC - SO when you see 2.5 BTDC...
Did you guys hear somethings abot this, when u change oem flywheel to lightweight flywheel its necessary to replace crank pulley to lightweight also ? apparently, you can damage rod bearings without replacing stock pulley to lightweight pulley ..?
Is this bolt responsible for Rear Toe Adjust ?If Yes, how it works?
I have to screw or unscrew that bolt to change rear toe ?
I also have adjustable rear upper control arms to set camber.
Can i use mix of mtl-90 and heavy shockproof to T case ? we say 300ml heavy shock and 170 mtl90 ?
Because i have only 300 ml of heavyshock..
As long as i Buy another heavy shock can I just ride that mix ?
What tools i can use to measure Flywheel step height? there is nobody in my area who can measure Flywheel step with dial indicator even machinist in my area does not know what is step height...
what do you think about this method ?
Hey Guys!
I will take off transmission soon to mount new Clutch and I also want to change Output shaft seal
this one ( and others axle seals)
Can i take off the seal with screwdriver and just put new seal back ? or I need to take off whole output shaft ? do I have to lubricate new seal ?
Hello guys !
after installing act 2600, clutch master and slave cylinder started to leak my question is which I am supposed to buy so that it works well with ACT 2600 ? I also have to buy new ss Clutch Line(from master to slave cylinder extreme psi have one) or not?
Do i need to put a washer...
Hello
I want to know if only my GSX 1G has it
I have same tire size at the front and same wheels , same offset , there is NO wheels distance but
The wheels at the back are more distant/protruding than the wheels at the front its looks llike this
Its normal?
Hello
I have little problem with my OEM turbo oil feed line. I bought new ones copper washers and screw it according to the manual with the right strength and oil still leaks..
Hello everybody!
I have some idle problem i dont know what i should to do I've checked everything.. IPS checked and adjusted, TPS checked and adjusted, Boost leak I dont think so, IAC checked unscrewed and i saw that its moving so its working.
I start cold car and everything its normal aas it...
Hello everybody!
I unscrew the link on the cruise control and as I screw it, I see that the throttle plate moves. In which position should the plate be? completely closed or is it supposed to be open little bit ?
Hello I have big problem with my oil feed line to head , I screwed the screw badly and destroyed the thread
here is a picthe thread is broken but in the middle is already goodthe bolt spins in place and i dont know what to do :(I have a few ideas
A: Buy longer banjo bolt 10x1.25
B: Buy...
when I am driving a car, all this time the light shineshow i can take it off
I changed the starter and the light started to shine but I think everything its okay just this light...
hello i take off my turbo and now I put them back and Im not sure if hole in the screw must be equal to the hole in oil line fitting ? or can I just screw in and the oil will go to turbo anyway ? trubo oil feed line and fittings are stock
It is worth to throw away Mass air flow sensor ?
If my goal is 350hp is it worth to move something at all with Mass sensor ?
I will buy dsmlinkv3 soon so I just wondering what is needed to throw away mass sensor It is worth ?
My Car is 1990 eclipse GSX
I will put my N/T Throttle Body from my 92 eclipse GS to my 1990 GSX
But i saw that N/T 92 TB have only 3 vacuum ports and my Tutbo TB from 1990 have 4 vacuum ports
how can i connect it? I don want to delate vacuum hoses
Hello! I'm new here (sorry for my Bad English)
Okay i have a question, I will put my N/T Throttle Body from my 92 eclipse GS to my 1990 GSX what do u think guys ? will it work?
i have adapters so i can connect new ISC and TPS senaor easily ;)
But i saw that N/T 92 TB have only 3 vacuum ports...