Have a used set of tein z flex coilovers i pulled off my car to go air ride. They rode great. Soft for daily and stiff when I ran at the track but my build is going in a diffdirection so selling these. 1 will need a new top hat. I'm sure it would be fine but I would just purchase a new one for a...
I dont believe the spyder came with rear mats unless that was an extra option from the dealer. I know the coupes had them but my spyder was all factory stock when purchased and had everything but rear mats that came from factory. I'm sure he could make them if you could find an oem for him to...
Found a company to reproduce 2g spyder floor mats for us. Ive been working with him for a little bit now and hes agreed to make them so i sent him my oem mats to go off of. He had a hard time doing the spyder logo exactly the same but what he did looks great. Fitment is great. Quality is great...
Ok I kinda figured I wouldn't have an issue but just wanted to double check with fellow dsmers. My machinist isn't sport compact savy but is pretty reputable in the area. He's the one who pointed this out to me and I told him I'd do some research and find out for sure. Ill be assembling the...
Hopefully this is the right area to post this but I have a set of older Brian Crower Billet I Beam rods and the PE width is 1.038. Now the new Brian Crower rods have a PE width of .900. With mine being wider will I have issues finding pistons to fit these rods? I cant find any specs online of...
That sounds like a good idea. There's plenty of other things out there I can make fast and have an abundance of parts left. I could sell my current turbo and manifold and get 2/3 what I'd need to throw on a hta86 or fp green and still have fun and keep it tame on a stock motor. Ive got a lot to...
I'm not sure honestly. I bought the motor already built and tore it down to inspect everything and upon inspection i noticed a few things that were half assed along the way so fixed what I seen and threw it in. After driving it I noticed a noise almost like a pulley was loose but I looked over...
Whats up guys? Today i threw a rod and I'm undecided of what direction I wanna go. The current setup is awd swapped auto spyder. Has a sinister OG 8" core 1 so its very loose for a street car but makes for a lot of fun to launch. Motor was a wiseco piston eagle rod manley crank build but I've...
Your the best. Thats roughly where abouts I was thinking but a lot of the pics from guys with the same kit say theyre running 18x10.5 et15 and they sit flush front and rear. Asked if they was running spacers but never got a reply back to confirm. Its like its a big secret or something lol. I...
The fit isn't the best but its pretty good for custom fiberglass work. I've definitely seen worse and worked with way worse in the past. These will need minimal work to fit nice.
Hey whats up fellas. I recently picked up the carbonetics AR kit for my car. Obviously any wheel combo that wouldve worked with oem now sits in quite a bit. I'm trying to figure out what offsets I need to have the wheels sit flush. I jacked the car up and put suspension on jackstands so it...
So i havent posted in quite a while so here's what i Recently got, some lightweight goodies for the car.
Carbonetics Talon AR Kit
Carbonetics Talon Lip Kit
Carbonetics AB V2 hood
Carbonetics CSL spyder trunk
Rota Slipstreams with M&H slicks
Also built a turbo back exhaust as well. 3" vband...
2g eclipse tinted taillights $75.00
2g awd apexi catback with gutted OEM muffler 3"inlet dual 2.5 outlets with race bullet miffler inside the muffler $150.00
Knockoff 16g on tubular manifold, jpipe and licp included SOLD!!!
Innovate MTXL comes with 2 wire harnesses. Will need new sensor as I...
Bought these from a member on here used a while back and ended up buying another motor and not using them. One rod started to spin a bearing so would need to buy another rod or have a machine shop fix this one. 350.00 plus shipping and pp fees.
Check your actual mpg and get back to us. We can't help you if you tell us you drive to work and home but we don't know if you work 40miles away or 100 miles away so get your actual MPG
Selling a set of used Wiseco 1400 HD Pistons pn 6625M863 and Eagle Rods pn CRS-5900-MBA for sale. Will need 1 rod either resized or replaced. I'd just buy a new one with how cheap they are though. Asking 400 plus shipping and pp fees. If you need anymore pics or info just message me.
Autos are much more fun then a lot of ppl think especially when built, stalled, and a shift box. I have just as much fun in my built awd auto spyder then I did in my old 5 spd spyder. Launching at 20psi with no worries of breaking stuff makes it all the more enjoyable.
I've ran a cosmetic without machinine. It worked, but always seeped coolant and oil. Combustion was fine and sealed fine. I ended up pulling the head and went with a felpro. I had no problems with the felpro and AARP's running 30-35 psi.
Not sure if it's anyone from here or not but I thought I'd ask. I seen on 1320 videos a 3000gt racing at bandamere. Believe he was running around 8.80. I was just curious. Here's a cpl screenshots along with the link. He's about 12:30 sec in and some more footage a little later in as well.
Purchased because I was gonna run it but going a different route now. Had a cpl hairline cracks and welded some up when i was bored but have since changed my mind and it still has 1 or 2 cracks that need to be welded. I believe this manifold originally sold for around 450 bucks back when they...
After more research on their end come to find out it's an old original 8" core. Being on a budget he recommends sending it in for the tightening up the offered with a different stator. He said it'll help tighten it up with less slippage then an ipt converter but will still have the high stall...
Ok so I emailed them at sinister and like I thought this converter isn't ideal for my combo they way it sounds. I'll have to get some info for him to calculate my slippage on it and go from there. Gonna see if I can send this in and maybe get it setup better for my car or if it's just cheaper...
So today I decided to make sure wastegate wasnt able to open and went and did a pull and still didnt spool any quicker so that eliminates that theory. So wastegate isn't the cause of i . Only thing is really the converter but when on the brake it comes online quick. Maybe because its loading the...
Yea only boost leak I found was a throttle shaft seal leaking a little but not anything I'm worried about. Idk what else could cause slow spool. Turbo was recently rebuilt and had the turbine clipped a little to help last in the small housin . Guess that's something justin does on all hx40s to...
I've got such a heavy spring in there that i highly doubt its cracking open early unless my backpressure is insanely high. So running both ports isn't gonna help. I thought about that as well and asked several big ppl in the dsm community and they all said it's not gonna change anything.
No I'm only using the bottom por . I'm not running ebc. Running a dual stage turbo xs mbc but only running it single stage right now until I can get this figured ou . Then I wanna set 1 stage for lower boost and under 95% throttle for launching and 2nd stage for once I'm off the line and 100%...
I'm running the sinister draginator 9.5 which is
Drag DSM ( 7-8 Second E.T.) with Nitrous or
Small turbo (14b-16g) looking for a better flash stall and more MPH than the stock converter up top
Showing sub 3% Slippage at 140mph on a GT4202 at 38-40psi
Here are some logs if anyone cares to look over of the slow spool up.. Ill post up a launch log as well but ignore the knock on that one as i forgot i had the ac on lol... But youll see when stalling it up on the launch ive got full boost by 4500rpm..i have checked for boost leaks exhaust leaks...
Already had turbine failure. Lasted about 5 years of abuse from me and idk how much from previous owner but yea shaft got bent and locked up so basically had this turbo built by justin.I have a t3 manifold and was thinking of going t3 but I cant afford to lose anymore spool. My powerband is...
But shouldn't the .55 housing help it spool much sooner at the cost of killing flow up top? And I wanna get some adjustable cam gears next to play with that to try and help it come alive sooner.