Im putting together another 7 bolt right now. I just went through all of the pans I have here at the shop and none of them are in nice enough shape. They all look like they where bolted to engines that where dropped on concrete from 10 feet up. No clue how guys do this but I can tell you that it...

Complete setupComes as seen in photos with couplers.125 picked up in CT. Willing to ship.Buyer responsible for shipping/paypal fees

Ive got a nice cyclone Intake Manifold up for grabs.Has a good quality powder coating on and comes complete with butterfly assembly and actuator.Looking for 225 picked up in CT. Also willing to ship if need be.Buyer will be responsible for shipping/ paypal fees.

Hey guys- This has nothing to do with DSMs but I feel like you guys may be my best shot at figuring this out......Ive got a fair amount of time into this strange problem, and have made zero progress.I have a pretty nice Brother laser printer (MFC-L2740DW) which was a little on the expensive...

I picked up a 97 GST about 3 weeks ago. Cheap.-The car was an auto, half way through a manual swap. -The car was a GST, half way through a GSX swap. -The car had grey interior, half way through a Black interior swap. -Engine bay was in spray can primer- very poorly done, over spray everywhere...

SOLD

Ive a got a full 6 piece set up for grabs. All clip retainer tabs are in perfect shape, not a single broken tab. The OEM black paint is in good shape.Im looking for 225 picked up in CTWilling to shipBuyer responsible for any paypal fees and/or shipping

https://scranton.craigslist.org/cto/d/hazleton-1991-mitsubishi-eclipse-gsx/7008128574.html

Ive got a dual axle 7x14 enclosed trailer that i use for other stuff. Not meant for cars but could hold the weight for sure. I want to go pick up a Talon that doesn't run. I know its going to be super close.......I can get the car in there but I cant tell if the doors will be able close. I...

No E85 around here so Ive been using methanol injection with excellent results for the last year now. I dont need the flow gauge at all, but it is nice to be able to glance at deep in a pull and know for sure that the methanol is flowing. Sure there are lights that indicate that the pump is...

Ive got a complete 95 GSX for sale. The car is whole, runs and drives but needs some work. This car would make a great AWD swap for someone with a GST/GS/RS as everything is here. It could also just be cleaned up and driven. The transmission is mint and is the best part of the whole deal, it...

You guys are gonna love this! Some bolt on tech............A friend found it on facebook and just sent it to me.....Enjoy!!

Ive been doing whatever I can to get the most out of an evoIII 16g setup. I recently picked up what I will be needing to recirculate the bypass valve. Id like to hear about anyone else's experience out there that has experimented with this on Speed Density, and would like to know if it was worth...

Has any one found anything that works well to replace the rubber seals for the 4G63 timing covers? I havent even looked yet but was hoping to find a roll of something perfect on McMasterI tried the aftermarket kit offered by Beck Arnley but the quality is not what Im looking for.I really...

Tein wants 500 bucks to rebuild my 2 rear coilovers. They are very clean and 100% intact, just started leaking. They refuse to sell the parts. Extremely lame.I would never buy their stuff new as this is far from reasonable. Glad I got these cheap. The best they did was offered me some stingy...

I have a set of what is alleged to be HKS 272s...... Has anybody ever seen this?? With the crude measuring tools I have, the B02 matchs the HKS 272 ex cam I have ( PN M006) I dont have a M005 to check the B01 against. I searched these odd numbers every way I could think of and came up with...

Im doing a headgasket/timing component change......everything on the standard list. I tried to crack the nut that holds the front balance shaft sprocket on, before removing the belts, and while holding the crank at the main timing sprocket with the wrench I made. I could feel that it was about...

Hey guys-I picked these up semi local yesterday......I say semi because it should have been less than a 2 hour ride, and it took me 2 hours just to get through Queens......anyway, I know I got a good deal on these but I ant seem to find a whole lot about the exact units I have. I see others...

APEXi SAFC II in great conditon. Comes complete with everything it did when I bought it brand new. Including the users manual, the wiring manual, and the original box.225 shipped

Hey guys-As of today, I am driving on an EvoIII 16g. Its fun and all but, after a short period, it leaves plenty to be desired. Im picking up a meth kit from a fellow member later this week as there are no E85 stations in the hurtin state of CT.I have 2 mint condition turbos on the bench...

I couldnt run the stock unit any more so I went with the complete "kit" from extreme PSI. For the price, with the gauge, and other odds and ends it comes with, its a decent buy for the price.I've been looking for a good spot to stick this thing and really wasn't happy with any of the methods...

Complete setup for 2g install75 shipped

Intake pipe for a 2g75 takes it

Greddy FMIC, no leaksGot me by for several years. From a time when it was tough to get a setup for under 1k.All the pipes are here, and all the couplers and clamps should be here, maybe one or two the buyer would want to replace but complete for the most part. The upper IC pipe had a...

Set of 4 Fuel Injector Clinic ball style 550sno issuesAlways worked great125 shipped

Perfect condition with no uglies. I bought this brand new back when they where available.Harness is in great shape with no damage to it anywhere and has not been shortened or altered in any way. Comes with original manuals, everything it came with new.275 shipped

Decided to go with the evo3 manifold. This is nothing new but decided to share my go at it. I also installed the 1g NA throttle body which I had sent to Steve at throttlebodys.com who did a fantastic job on it, great professional service, and very quick too.The manifold installed very nicely...

Greddy Front Mount kit complete with all hardpipes, upper and lower- 400SlowBoy Racing MHI Big 16G (compressor cover is 2g drop in style)- 375Precision 1000cc injectors- 150FIC 550s- 135MHI Frank 1- not sure what to ask on this but I used to love this thing back in the day and almost...

Hey guys-Ive got this rare Greddy typse S Black edition from back in the day. Leaks really bad. I mean it starts blasting right out through the top cover seal at 5 psi. Does anyone know where I can new o rings to rebuild it with?

I plan to wire in my wideband to the ecu tomorrow for logging. As of right now (2g DSM) I have three sensors installed. Front in stock location, wideband in the first 12" of the downpipe, rear at stock location.I read the list of available inputs for the 2g and it looks like for me (evo 8...

I picked this up a while back and have had it sitting. Exhaust side looks standard. The compressor is a "42" big 16g cover but its been machined out for a larger 7 blade wheel.......thats all I know.Can anyone tell me anything about this setup, and how it might perform compared to a better...

Hey guys-Looking for some feedback on the fitment of these units in a 2g. Id also like to know if the 3 row is worth the space it takes up over the two row and if it will fit reasonably with their slim fan/shroud set and allow the FP green/red setups. Thanks...

server error

One of the things thats been on my list that I am finally getting to is the failing seam sealer all over my 97 GSX. The car has less than 80k on it but its obviously old now. Almost every bit of seam sealer on the car is dried out, not sealing anything, and is very brittle. If left unattended...

Looks like HKS 264s are no longer available....I was really wanting those as that is what I used in the past to reach 400 (16G) and it worked, so I knew exactly what I was getting. Anyone know where they can be had or what would make sense in their place? Sure I could figure it out but hearing...

Im looking for some feedback on the autometer (p/n 4344) EGT kit. I installed mine the the #1 runner of an FP manifold as we have all seen plenty of times. Mine functioned exactly as it should for about 30 minutes before I literally watched the display go from actively reading out actual and...

I wanted to leave the OE sensor in the O2 housing for now, and wanted the wideband up close to the turbo, so here is what I came up with. My O2 housing is a relatively expensive quality unit, so after toying with the idea of mounting it there, I decided not to mess with it and did this. It fits...

I know there are other threads on this but I wanted to show the results of my port job on the wastegate and report back with how it turns out after I put it back together and take the car out.I started off with a carbide rotary file on a pneumatic rotary tool, then a small drum sander, 80...

Hey guys-Was wondering if there is a solid method for holding a wastegate flapper shut so you can go external with the option to go back to internal down the road......maybe you sell the turbo to someone who wants internal later on, or just dont need external on a different setup down the...

EVLGSX submitted a new DSM Profile :1997 GSXRead more about this vehicle here...

Hey guys-Ive been looking for an O2 housing for the following scenario--TDO5 -Flanged for an external wastegate (Tial 38mm 2 bolt flange) that recirculates (doesn't dump atmosphere) -Flanged for standard 2 bolt downpipe (OEM location)The closest thing Ive found is an offering by...