I have purchased a Dynatek ARC-2 but when I give it power from the battery the status LED remains off. I changed the fuse but still nothing, does anyone know what wrong?

ok thank you very much do you know where I can get new synchros ?

I was thinking making 3-4 with double synchros My car is at 450whp and 55kg of torque will it hold ?

I am in the process on reassebling my transmision on fwd i will be using a quiafe lsd and a welded center diff. i have all the bearings new. What else are you suggesting?

Can someone give me some feedback about some good 2 din android 10 stereo ? Thank you

Because I had the 2ga headlights the 2gb headlight wanted rewire. I don’t know what did he do to the wires.

I have hb4 on low and hb3 on high

Yes they work normal but when I change to high beam low beam turns off

I want when the high beam is on the low beam stays on

With the previous headlight both low and high stayed on when I changed them they don’t.Does anyone know the wiring ?

Sorry but if I connect in the passing switch when I turn on the low beam the high beam stays on too

Thank you very much

Can someone tell me How i can make my low beam stay on with my high beam ? Thank you

Το ξέρω γενικά υπάρχουν αν ενδιαφέρεσαι

Still active yes I had my engine blown so that why I stoped but I will continue when I order the parts

I want a price for awd swap parts without trans and transfer all the other parts and for shipping to Thiva Greece with postal code 32200.

Evo 8 HKS cams on DSM, Tomei Evo cam gears. Evo 9 spring and retainers, supertech valve seals and GSC zero tick lifters.

I have cas on cam gear but I think I will use 1g cas

I ask what is the better to time the engine with the evo 8 cams.

Hello i just bought a pair of HKS 280 cams and i want to put them in my engine i have cam timing. I just want to ask what is the best way to put them in i have 3 different cas one from 1g green top and 1 from 97-99. What is the best way to put them on what timing cas is the best to use? Thank you

Thank you very much you cleared things up for me .

Hello I have a evo 1 transmission and transfer but I want to put a 3000gt rear differential how I can change the final drive of the transmission to match the rear differential ?

I have a uego wideband with narrowband simulation but in hot starts the cars afr goes lean and after some time goes at 14.7 what start up time you have?

Here isnthe log and the tune

When the car is hot it doesn’t start immediately as when it’s cold and if I give it a little gas and let off the rpm drops below idle to something like 500 and if I steer it will shut off. But if i wait a little with gas it idles and drives perfect. Can someone help me?

So turns out that my tps has to be mechanical adjust to 0.63.

toady i uncheck the simulate the ide switch and te idle was horrible the car stalled and the isc wont move. Here is the log.

I will post a log tomorrow at idle to see what I mean.

I have it on 0.63 but I have it with tps because it works better that way. If I uncheck it the idle goes below 900

I have a mishimoto thermostat and I have lower the coolant offset so they can work together . What do you mean set the tps right ?

My car works perfect but i upload it for some expters to see it no problems no vaccum leak nothing. Mods walbro 255, sard 800cc, afpr aeromotive, Speed density, GTX3071r Garret, aem wideband. Thanks

how you see my log ?

I will try this with FPS and see if changes.

I have it in stock values.

Thank you again for the help

Yes thank you very much. How much leaner on idle and cruise are you suggesting ?

This maps I have made them my self from 0 it’s my first car and my searching all day. All of the help that this forum will give it will be great.

So what change do you suggest ?

Can you take a look at my maps what change you suggest I make ?

What suspenion kit or Coilover do you suggest for street use ?

I will purchase the Koni yellow sport but I don’t know a good set of springs I want wheel gap gone

Thank you my friend

Hello I have a problem and I tried everything but I cannot solve it the car runs great when it’s cold it’s start very quick but if I warm it up and stop for 1 hour and then try to start it up it cranks 3 to 4 times and then starts up. I suspect maybe the injectors having this problem I have sard...

It’s not available with a evo 3 ecu it’s only available in 1g and 2g ecu the full version

install of cupra lip with a proper way to mount it ? It needs cut of the bumper ?

Does anyone have photos of H&R lowering springs are they good? I have them but I never put them on because I think it will lower too much.

Thank you guys for the help it is very helpfull and in Greece this car is not common. And this site is my guiding

I have a gtx3071 I am running 1.5bar for the last year and I have no problem I tuned it my self with ecmlink but I want all the other features. Thanks for your replays

No it works I’m sure he had it in his car

To find a 2g ecu here in Greece is very difficult. And my friend has a ecmlink full chip for 1g and he will give me for free.