Has anyone bought or sold a 1990 GSX in good condition in the past couple of years? I'm looking for comparables for an independent appraisal on my car.
If you don't want it posted publicly just shoot me a PM!
Let me know, thanks!
-Erik
https://apnews.com/article/japan-moon-lander-slim-probe-pinpoint-2908c74d9e3c4c8a5eabfb6b1625c617They couldn't figure out why the solar panels weren't charging until the rover snapped a pic of the lander:
This noise just started a couple days ago. Does anyone recognize the noise? you can hear it best at the end of the video. I suspect maybe AC tensioner but i dunno
I need to find some aluminum / easy to bend piping to make some coolant hardlines, 1 1/8" ID or thereabouts (fits most coolant hoses). Where would I find something like that (I'm in the Denver area).
Thanks!
Is the 10 Amp fuse (pictured) the only fuse for the power mirrors? Mine don't work, but the fuse is ok. What are the connectors below the red 10A fuse for? It looks like a connector of some sorts.How can I test the switch on the dash? I will try a replacement switch when I can find one...
My OEM Infinity Stereo (pictured) sounds worse as it gets louder. If the volume knob was 0-10, then volumes 0-6 progress normally, getting louder and sounding better. But volumes 7-10 barely get louder and sound quality goes way down.Has anyone else ever noticed this with their factory...
These wires go to the rectangular connector on the CD changer from a 1997 Talon. I assume they are Constant power, ACC power and Ground. Can anyone help identify them?NOTE - This pic is NOT my car, otherwise I would just hook up a multi-meter and check.Thanks!
Anyone have a pic of a 2g turbo OEM muffler cut open to show the inside? Kinda like this:If not, I'll have one soon. Just curious if anyone can save me a trip to the junkyard. Thanks!
-Erik
Is it possible to diagnose o2 sensors with an obd2 scanner? The only reading is voltage, but I've found things online saying the graph should be fairly level.The first screenshot is what the 4 o2 sensors on my 2004 suburban looked like. I'm trying to fix p0420 and p0430 (catalytic...
Can I run these injectors? They're Bosch 280150837 . The reason I ask is they are a bit longer than stock. I got them on the classifieds here like 3 or 4 years ago.Thanks!
DISCLAIMER: bench racing threadI have a spare engine from a 1991 TSi that I'm tempted to do a silly engine swap with (FWD). Obviously I'll need custom engine mounts, custom plumbing, etc.But what axles would I need?I assume they need to be custom made, one end to fit the DSM trans and...
Which o2 sensor is responsible for keeping track of the air fuel ratio while driving? Front, rear or both?I failed emissions with really high CO GPM, which means I was running very rich.Car is bone stock and passed emissions 2 years and only 1000 miles ago (car sat most of the 2 years)...
What's this connector? blue and black above the heater hoses on the firewall.also, it sounds like there is a socket in my valve cover. i'll pop it off later tonight.
What car/hood is that? Pretty sure it's not a 2g.
https://www.vividracing.com/vis-racing-carbon-fiber-invader-hood-mitsubishi-eclipse-9599-p-86960.htmlI'm looking to buy one but no one has the right picture which worries me about getting the right thing when I order.I emailed a couple...
I'm working on my plan to put a 2.4 block in my 97 Talon TSI and keeping the 4g63 head.Will the AC compressor and all the other accessories work without modification? I have ice cold AC and don't want to lose it loII found a local running motor from a 1995 Summit, that should work, right...
I'm painting my car soon and I need new emblems, mainly the TSi and AWD emblems. MR777709 i think. I managed to score an Eagle emblem so I'm stoked about that.To be specific, I'm not looking for 2D vinyl stickers. I'm looking for someone who makes or CAN MAKE the 3d emblems. Or where I...
I'm currently running the Jafro monster can mod, and it works perfectly, just like factory. Except it looks like ass and the Monster cans don't last forever.I need help picking out a new one. Ebay is full of nice looking tanks, but none of them have the same setup as a stock 1g dsm...
Car died on the way to work. Just shut off. Car cranks fine but no start.I pulled over and tried to connect to ECMLink but just kept getting
"ecmlink no response received
action raised exception"It's on the right com port and i have it set to scan, and the green light on cable blinks...
Obviously it's heavily modified, but it looks like a 70's - ish muscle car to me. Maybe a Camaro or Nova? Charger?What do you think? I think it's cool that it's actually a car again, not a glorified tank.
One of these bolts on my transfer case is stripped, I must have over tightened it. Can I drill, tap and helicoil these without any issues? There's no oil / fluid passage there, right? I circled both because i don't remember which one I stripped.
My 97 talon has the factory infinity 2g amp with infinity stereo. (top)If i swap in the mitsubishi stereo (bottom), will the stock infinity amp still work?I'm guessing no, as it's missing one of the plugs that goes to the amp (see back pic)anyone know?
Who has long term results for painting their plastic interior bits? I'm talking at least a year.What paint did you use?
What prep did you do?
How has it held up? Any chipping? fading? cracking? peeling?There's a million threads and videos floating around on painting interior plastic...
I need some help finding the clutch bushings specs for a 1g clutch pedal assembly. There are 5 bushings total, 2 are the same. @Brando_DSM used to make them and gave me the specs he had, but I need all of them to get some new ones made (or ideally find some pre-made that match)...
How far should the slave be moving? It's moving less than 15mm for me (see vid).- Brand new clutch, flywheel, slave and master.
- stainless steel clutch line
- The fork is not hitting the bellhousing (see vid)
- Clutch engages RIGHT off the floor.
- Clutch is bled properly.
- Master is...
I've got a 3 inch exhaust with a straght pipe v-banded in where the catalytic converter should be.What cat is best for passing emissions? Steel? Ceramic? Should I take it down to 2 inches to make it more restrictive? I'll only have it on to pass emissions. Or keep with a 3 inch...
I pulled a trans from a 1991 Talon and it has 22 splines like my 90... Can I use it in my 1990 or are there little differences I'm not seeing? I'll post a couple pics later.**EDIT** I sold the trans.
I finally got a spare motor to build! And by "build" I mean it's going to sit on an engine stand in my garage for probably a couple years because I don't have any time or money. But hooray!!!!Who's got a 1990 trans they want to trade me? : P
I pulled out my clutch from my 1G Eclipse to upgrade it and found that the clutch fingers are extremely worn, but also the throw out bearing wasn't aligned perfectly centered on them. What could have caused this? How can I prevent this when installing my new clutch?A shop installed the...
There's a 1996 GS spyder at my local junkyard that I want the crank out of for a future 2.3 build.Can I pull the crank from under the car? Any special tools required? I want to be prepared before I go. A specific tool/socket list would be awesome.
I don't have the list, but I'm looking for one. I did a bunch of searching but found a lot of conflicting info so I'm asking here.I'm in the process of signing up for junkyard notifications for when cars come into my local lots, and I want to start harvesting some 4g64 cranks. I'll update...
1997 Talon Tsi awd, bone stock, 5 speed. Transmission shifts fine, goes into every gear perfectly.However, the transmission (or something in the driveline) is noisy when on the throttle. It's barely noticeable off the gas. It does it in all gears.No idea when it started, I just got the...
Got a 1997 Talon TSi I'm having a misfire / stumble / miss problem with. It's fine when it's cold, but when it's warm it starts to misfire at low RPM and at idle. Higher RPMS seem ok. Car is bone stock.Plugs and wires have been changed, and I assumed it was the ICM so I swapped that out...
1990 Eclipse GSX
Speed Density
ECMLink v3 full
hx35
1000cc PTE injectors
walbro450
etc (profile is up to date)For a little context, this issue started back in December.
http://www.dsmtuners.com/threads/runs-lean-then-dies-wont-stay-running.515235/The problem was intermittent but has been...
I'm going to pull my intake manifold and tap it for a boost source for my GM Style 4-bar map sensor.What size tap and bung do I need? Is 1/8 NPT threads to 1/4 barb?What's the best way to clean the inside of the intake manifold when it's off? Oven cleaner and pressure washer?Is a thick...
I'm having a problem that I think I have narrowed down to a bad map sensor. On the car now is the OmniPower GM-style 4-bar MAP sensor that I ordered from ECMLink with my SD setup.
http://www.ecmtuning.com/product_info.php?products_id=47However, I think it's going bad (car randomly won't run...
Nothing more disappointing than watching a perfectly good 6-bolt 4G63 engine and transmission out of a completely stock 1990 GSX get dropped FIVE FEET onto concrete by the forklift guy after it's bought and paid for, AND you spent 4 hours pulling it in a blizzard with hand tools. The sound it...
No changes to tune, no boost leaks, just started randomly yesterday. Does it hot or cold. Running SD.
I can crank my injector deadtime up to get it running temporarily, but it still dies.What could cause this? Bad injector? Bad wideband? I'm stumped!(i said injector duty in the...