The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Morrison Fabrication

Search results for query: *

  • Users: Vdubzr32
  • Content: Threads
  • Order by date
  1. Vdubzr32

    Trying to find owner? ATCO 10/24/21

    See if the community can ID the owner, i want to pick his brain with questions.
  2. Vdubzr32

    2G side marker

    Cut this plug from the side marker light on a 96 2g talon. When I did the research on the site the plug looks different did they change from 96 to 99.
  3. Vdubzr32

    2G Trans feels like it’s not going into 1st

    For starters I do NOT have a TCU, I’m currently running the obsolete force four DSM shift box. I parked the car and left on deployment. The car drove fine prior and shifted with full force on the force four shift box and kiggly mod. I have since returned and got the car started. Went to move it...
  4. Vdubzr32

    2G Awd auto shifts Hard

    Ok so I recently converted my 5 Speed AWD to Auto. I got the center diff done by ITP The shift kit and rebuild solenoids by ITP A restalled Converter by ITP LSD reari installed the 3g Auto-manumatic on a force four shift box, On/Off switch for 4 gear OD. No TCUOn low rpm driving the car...
  5. Vdubzr32

    DSM owner that are LEO or Vets

    Just curious in our community which DSM owners are LEO’s or Vets. This makes the community even smaller.Thanks
  6. Vdubzr32

    2G Innovate MTX-L

    Not sure if this is the correct place for this question.I currently have the Innovate MTX-L dual oil pressure and Temp gauge. I have the old style Gauge P/N 3852. This type has the oil pressure sensor with the two prongs.So my sensor went bad and Innovate no longer provides the two prong...
  7. Vdubzr32

    For Sale Non-LSD 2g rear AUTOMATIC

    97 Non-LSD rear AUTOMATIC175.00 buyers pay shipping weight estimated 48lbs. Will ship anywhere.
  8. Vdubzr32

    Resolved 2G AFPR 55psi?

    ok so i recent installed FIC 2150. Seal n Orings with the injectors. I have a Walboro 450 installed with dual Orings as well. -6an line from pump to rail.Now two things i lose pressure as soon as I turn the car off. Never did that before when I had PTE 1200 and Walboro 255.Also when I prime...
  9. Vdubzr32

    For Sale VC, catch can, fuel pump , fuel filter

    Parts been siting in my garage no longer need them$50-Walboro GSS342$10- Oem Fuel Filter$20-2x Injector Resistor box$100-VC 12-an fitting had a small crack was welded works fine it is shaved$30-Moroso Oil catch can -12 an fitting to go within VCPM or text me 973-234-4690
  10. Vdubzr32

    Sold AWD LSD 5 Speed Rear

    Up for sale is 96 AWD LSD rear 5 Speed. I just removed from my car. 200 plus shipping
  11. Vdubzr32

    Sold South Bend Clutch Kit

    Up for sale is a south bend kit. I used it for less than 100 miles and spun bearing. As you can see in pictures a lot of meat on the bone. It’s been sitting in storage has surface rust from the humidity sitting in the garage.The part number for the clutch is on the box.Selling 250 shipped
  12. Vdubzr32

    2G Coolant in Oil

    So i was finally able to start my 2g after two years. Time hasn’t been on my side to work on the car. Rebuilt fresh Head and Bottom End. The head and bottom end were done at a machine shop resurfaced. ARP stud were used and tq to spec. Multi layer Headgasket was used.Yesterday i added...
  13. Vdubzr32

    2G No Start 6bolt 2gAuto

    Ok so I recently finished my build 6bolt 2g head with CAS. While doing so I converted the 5 Speed to an Auto AWD. I have everything installed and the car cranks but no start. List of mods and things I’ve checked. built" 6 bolt motor. 2g head CAS conversion, 272 cams,BS deleted, TPI converter...
  14. Vdubzr32

    2G Single line catch can

    I’m Not sure where to post this. Please move if need be. Thank youI have a single line catch can with a vent. And from the Valve cover i have one single -12 an fitting. The port that goes to the intake is plugged. Does it harm the car having just one line to a vented can? The valve cover and...
  15. Vdubzr32

    2G Poly Mounts

    I'm doing a 6 bolt 2g AWD Auto in my Talon. I'm looking for Poly mount kit for auto trans but don't seem to find any... I was looking at the Avid mounts but I know they won't fit because they are 5-Speed mounts... Anyone Have an idea or should do poly 75A inserts. Thanks
  16. Vdubzr32

    2G Weird noise chatter

    Just had the trans replaced today everything button up ready to start. I start the car and start to hear this noise a video is attached. The noise is somewhere to the right of the motor when facing the car. I pulled valve cover in case something was loose under there put nothing to my knowledge...
  17. Vdubzr32

    2G Clutch life

    Posting to show the clutch and flywheel life of a stage 3 competition clutch kit and competition lighten flywheel. The damage it received in under 5000 miles to be exact 4206 miles. Shouldn't it last longer?Daily driven and raced 3 times of actually launching. If u look at the pictures pads on...
  18. Vdubzr32

    ECMlink Random Knock Low RPM

    1). Any boost, vac, or exhaust leaks? Boost leak tested 5psi above your max boost with no leaks? YES2). Verified mechanical timing? YES3). Verified base timing? YES4). Ignition system COP or Stock Coil: STOCK Wire brand and Age: NGK NEW Spark Plug brand, type and Gap: BPR7ES .0245)...
  19. Vdubzr32

    Resolved Idle surge

    This is possibly the millionth Idle surge question asked LOL. The car idles fine when I start it. When I finally move the car in neutral going down hill the idle climbs alil. Once I stop completely at a traffic light the idle drops back to normal. I would drive on the high way and then put the...
  20. Vdubzr32

    2G Over heating going uphill or under load

    As title states the temperature rises u set load going up hill. I can city drive and temperature will not budge stay constant at operating temp. Once I get one the highway and start driving up hill and inclines the temp starts to climb. I left of the throttle and the temp will drop back to...
  21. Vdubzr32

    ECMlink Idle Log Playing with linkv3

    1). Any boost, vac, or exhaust leaks? No Boost leak tested 5psi above your max boost with no leaks? Yes2). Verified mechanical timing? Yes3). Verified base timing? Yes4). Ignition system COP or Stock Coil: Stock Wire brand and Age: NGK 2weeks Spark Plug brand, type and Gap...
  22. Vdubzr32

    ECMlink Leaning out before boost kicks in

    ok so im leaning out way before boost kicks in the car bogs bad and AFR drops to 17.0 ish. just seeing 0 vaccum or 1 psi. I replaced Fuel filter, Replaced fuel 255 Wally pump and o ring, pump is rewired and i am getting voltage, I conducted a vaccum check on the AFPR and im getting 1:1 Fuel...
  23. Vdubzr32

    2G oil return rubs block

    My oil return line rubs engine block. Any problems if I grind the nipple square about 1/8 inch to clear the oil return line?Need advise asap thanks
  24. Vdubzr32

    2G MAP t3 Manifold/ fans

    Who's running the MAP T3 manifold. GT35r BBAnd what cooling fans are you running.1 or 2 fans size?Thanks
  25. Vdubzr32

    Resolved 4 point harness instal

    I purchase the 2 inch wide Courbeau 4 point harness.Only thing that I'm lost at the install is where the belt strap would get bolted to.I have the driver side harness bolted to the stock seat belt bolt but can't figure out where to bolt the inner side of the harness the Female Clip side...
  26. Vdubzr32

    Turbo wastgate

    Can it be possible to make an external waste gated Fp black turbo internal.Just had this question searched but couldn't find answer or possibly my searching format was incorrect.Thanks
  27. Vdubzr32

    Over heating every situation. Is different

    This pass winter my oem radiator cracked on the plastic ends. I ended up buying an aluminum radiator changed the plastic end oem on. I drove the car fine through the winter with no issues. Now on our first nice day like 70 degree the began to climb in temp as I went up a slight hill. The temp...
  28. Vdubzr32

    Any body else running Evo3 swapw

    I just wanted to see if any one else has a full evo 3 swap in there 2g.See what they ran in the 1/4 or dyno numbers with there mods. Just curious that's all. I do know every car responds different to modifications so I'm not trying to compair my mods to any others.I hear it's far and...
  29. Vdubzr32

    ECMlink dsmlink v3 idle log

    here my idle log let me know what u guys think anything off. my ISC numbers seem high at idle not sure if its suppose to be 1 like in the wiki video.also the idle ranges up and down alil.i just installed the PTE 880 injectors and evo 3 intake manifold. rfemoved emissions as well thanks
  30. Vdubzr32

    Lake Hopatcong Morris County

    Just moved up to Morris County Lake Hopatcong. Wanted to see if there any Dsm'ers in the area.Lmk know guys pm or 9732344690 text me
  31. Vdubzr32

    Need advice broken bolt control arm

    Ok so I took my car to a local shop to get the lower control arm replaced due to normal ware and just want to freshen up front end.It gets done and then I take the car to alignment and bam all good..Although now the car pulls to the right after the alignment. I get under the car and...
  32. Vdubzr32

    throttle body

    Having a problem with the throttle body. I adjusted the tps to read .63v. When I push the throttle all the way down I get 95% throttle at 4.84v.I also do the throttle body adjustment as per ecmlink using the throttleraw reading and equation. Still only 95-96% WOT..When I finally test...
  33. Vdubzr32

    Injectors

    I have 880cc PTE injectors. I'm looking for the plastic shim on the bottom of the injector. The plastic sleeve that the injector seal goes over. Two of the shims are cracked on the injector. Is this sold separately and where would I find it ie. what's the actual name or part number?I...
  34. Vdubzr32

    Car bogged down

    Car recently bogged on me. I was driving normal and got on highway and went to open it up to see how it responds. On 5th as I push the peddle to WOT the boost is at 18 and I felt the car bog down and felt power loss. Wide band still read 10.5 at the time. Any idea? What can cause this.
  35. Vdubzr32

    CF Hood need you guys opinion

    I just picked this up because it was just so damn cheap 40 bucks I couldn't beat it. It's mad by VIS. Has minor scratched that are goin to be sanded down and resprayed cleared.I don't have current picture on my phone. But I upload the hood from VIS site.Too ricey or do able? Lol
  36. Vdubzr32

    Question regarding motors

    Ok I've searched and haven't found an answer for my question.Not to long ago I spun a bearing on my 96 talon tsi. So I quickly pulled that motor out and went on a hunt to get another 7 bolt due to the fact it was my DD.I ended up picking up a JDM motor. I had it opened up and checked...
  37. Vdubzr32

    ECMlink DSMLink v3 need help?

    ok so I just plug in my link previously purchased from someone on the forums. I downloaded the stock 2g software and fuel configurations.the car starts but wont stay on will die if I don't keep foot on throttle. not sure what I could possibly be.any help do I need something else...
  38. Vdubzr32

    Wideband reading help

    I just installed FPR and set the fuel pressure at 43psi. I also recalibrated my innovate wideband.Now at idle the reads 17.5. At like 2500 to 3000rpms the wideband reads 10.1. At WOT it reads 9.1I don't understand what's the problem. No boost leaks n it runs strong when I tested it but...
  39. Vdubzr32

    Issue with innovate MTX-L wideband

    I installed my innovate mtx-l wideband with no problems. I calibrated it and worked fine for a few weeks. Now it's giving me problem. It giving me error code E2. I know what E2 code means. I called innovate they say unplug the wideband and make sure you hear the (click) when pluging it back in...
  40. Vdubzr32

    Is this a good set up.

    I'm new to dsm and just purchased a Talon Tsi 2g. I bought the car with the following.Rebuilt head. Stock injectors. Stock 14b turbo ported. Ported stock manifold. Recycling BOV. Manual boost controller 3inch apexi exhaust (no cats) Greddy Fmic kit. Walboro 190 fuel pump. 2600 act clutch kit...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top