Hello, I have a valve cover I no longer need. Just been sitting on my shelf for several years. No damage done to it, good shape. Was saving it as a spare if anything happened to mine but I'm not longer in the dsm scene so it does me no good. I'm sure one of you guys would love to have it. Priced...

Hello I am no longer really in the DSM world and I still have parts laying around I need to get rid off. The best way to get a hold of me is to text me at 4404200543. I am located in Wellington Ohio if you wanted to pick up anything. More pictures on requestFidanza lightweight aluminum...

Hello I am no longer really in the DSM world and I still have parts laying around I need to get rid off. The best way to get a hold of me is to text me at 4404200543. I am located in Wellington Ohio if you wanted to pick up anything. More pictures on requestFidanza lightweight aluminum...

I have a basically new Fidanza Lightweight Aluminum Flywheel for a 6 bolt awd. I had it installed on the motor I was building for my laser over the last couple years and I unfortunately have to part ways with my build. The flywheel has very minor rust spots on the surface where the disc goes...

Hello I am no longer really in the DSM world and I still have parts laying around I need to get rid off. The best way to get a hold of me is to text me at 4404200543. I am located in Wellington Ohio if you wanted to pick up anything. More pictures on requestFidanza lightweight aluminum...

Hello I am no longer really in the DSM world and I still have parts laying around I need to get rid off. The best way to get a hold of me is to text me at 4404200543. I am located in Wellington Ohio if you wanted to pick up anything. More pictures on requestFidanza lightweight aluminum...

I have a basically new Fidanza Lightweight Aluminum Flywheel for a 6 bolt. I had it installed on the motor I was building for my laser over the last couple years and I unfortunately have to part ways with my build. The flywheel has very minor rust spots on the surface where the disc goes from...

Im getting out of the dsm game. Parts are located in Wellington Ohio, 44090. These parts have less then 300 miles on them. If your looking for more pictures i can text them. Easiest way to get ahold of me by texting me at 4404200543. Thanks for looking.Fuel Injector Clinic 775cc Injectors...

Hello, I have a 91-94 1g dsm ecu with dsmlink installed. I am going to be out at the shootout all day today (sunday). Text me at 440 420 0543, Looking for cash Thanks.

Im having an issue with my car and im having some problems diagnosing it. I have zero boost leaks at 25 psi. mechanical timing is spot on. ignition timing is set to 5 degrees BTDC, i just installed a new knock sensor because the old one was leaking all the gel out and i thought that would fix my...

I recently just acquired a holset hy35 and i was trying to figure out if the bolt on housing for the hx35 will work with the hy35. On extremepsi there is a vband option one and i was wondering if that would work? and if not what should i do in regards to a manifold.

apckofllamas submitted a new DSM Profile :BatmobileRead more about this vehicle here...

I just bought a 90 fwd turbo laser the other day. and since purchase its been a little notchy going into all the gears. Mainly just 2nd and 3rd you could hear a slight crunch. well i went to take off in it this evening and i couldnt get it to go into any of the gears. Reverse it would grind but...

I just recently discovered that my rear sub frame was cracked around that bushing. Im really not sure what i should do, i tried searching around and couldn't really come up with anything. none of the junkyards around here have any dsms and if they do there just as bad as mine. Im just looking...

I am having trouble figuring out if I should wire in the brown or yellow wire. I do not have dsmlink yet and I have been searching around and cant find an exact answer. I will be running the innovative sensor in the stock front location. Do I just cut the pin 4 wire (white) and wire it directly...

I picked up a 94 talon es and it needed a trans so i figured i could pull it out of my 92 nt laser parts car. I proceeded to pull both transmissions and put my good one into the talon. the only thing that was different were the plugs on the 94 so i cut them off the 92 because the wires matched...

apckofllamas submitted a new DSM Profile :92 PLymouth Laser Street MonsterRead more about this vehicle here...

whoever was driving the bronze ish color 1g without a bumper and a massive front mount down nickle plate props because that thing looked like a beast :thumb:

i have been fighting my laser trying to get her to idle correctly. mines a little different from what i have read. it will run fine on a cold start once a day. it starts acting up about 20 mins into driving, it really bogs down and is slower then my escort was but it will build boost just no...

My Innovative Mtx-l has been displaying a afr 22.4 and also appears to have a slight misfire and vacuum stays about 12hg. i have replaced my plugs and wires also this is a new replacement wideband. from what i understand my afr should never read 22.4 and i have no idea where to start

as soon as i start putting air into the stem its coming out from around the throttle body so i replaced the shaft seals. i still have a leak coming from that area. i have been using soap and water and i dont see any bubbles forming. also my car runs good on a cold start but when i start it after...

I have been wanting to do something new with my hood and i came up with this, i haven't seen it done before and i was just wondering if it would look "ricey"P.S. the rattle-can was just to give me an idea lol.

im not sure how to explain this noise and didnt have any luck trying to look it up. anyways my car is just idling and every random about of seconds go by you can hear a grinding/ scraping noise coming from the tranny side of the bay. i really dont know what to think of it. if someone knows...

i have replaced my shaft seals countless times in the last couple weeks trying to figure out why it is leaking from the TPS sensor. i have looked over the sensor for a crack and even changed it for another one. when i perform a BLT it wont build up to 2 psi even cause the air is just leaking out...

i have replaced the shaft seals twice now and it still leaks horribly, i have taken it apart multiple times and used dielectric grease to lube it up. i cant seem to get it to seal. it leaks from the TPS sensor, if anyone else has ran into this problem what was your solution? thanks

i cant seem to find a replacement sensor for my innovative mtx-l wideband. if anyone has a link post it up, thanks guys

i am trying to readjust my tps sensor and i cant get it so that the closed resistance is .9. it wont go past .7 is this okay? when its open throttle it stops at 4.8i just did shaft seals and now when i start my car it revs up to 3k.

somehow my innovative mtx-1 wideband wont power up anymore. i ran whole new power and ground and it wont display anything so i guess its fried. i was wondering if there was somewhere where could just buy the gauge instead of the kit with the sensor.thanks

i cant seem to figure out whats going on with my wideband. it is recieving power and also has a good ground. im not sure what to do next, is my gauge broken? i bought it brand new back in november. just wondering if anyone else has had the same problem

first things first i installed a walbro 255, aeromotive afpr, big 16g and ended up rewiring my cas. After the installs i couldn't get the car to start at all and found a huge boost leak and fixed those so it holds 22psi steadily. now the car starts but dosent wanna stay running for more then a...

i finally got my car back together and started but now its not running that great and my wideband is no longer displaying anything/ no lights or anything. would this cause my car to run like crap? i checked all the connections and they are all connected, is there a way i could of just damaged...

my battery is at 12v and when i watch my multimeter when i go to crank it it drops to around 2-3 volts but i dont hear a click and it dosent even try to crank so is this a sign i need a new starter? im having a no start issue after i put on my walbro 255, aermotive AFPR, big 16, also did my...

This is the second oil return line i have cracked on my car, i was just wondering if i should buy another oem one or get a stainless steel one? the only reason i am asking is because i have heard people have trouble with them kinking and they are about the same price from extreme psi.

I managed to break the pinle cap off the injector and it fell down in the hole. i cant seem to get hold of it or see it...not sure what to do at this point. :confused:should i pull ihe intake manifold?

The bottom of my turbo is covered in oil and it dosent look like my drain line is leaking. would that be a sign of a blown turbo? i have no in/out play and very little side to sidei went and took a better look and the fins do touch the housing so i guess its time for an upgrade! :D

Im installing my new front lower control arm and the bushing dosent fit right in the spot where the clamp goes over top :confused: Has anyone else had this issue and how did you resolve it?Thanks

Sometimes when i drive my car when i put itin neutral coming to a stop or turn my car will either drop to about 200rpms and almost die or it will actually die. im not to sure what would cause this problem:confused:

I was on my way home and my oil light came on so right away i turned my car off and pulled over. i take a look and theres all my oil over the ground. im not sure exactly where its leaking from.:confused:

I drove my car to work with no problems, she was running perfectly fine. I get off work and start my car and start heading down the road and i put it in second and around 20 mph the car is shuddering and sounding like absolute crapWTF i have no idea what is wrong with her so i figure i can get...

My first post on DSM tuners so please dont mind if i ask a few questions but im confused on how the rod is suppose to connect to the flapper and how should I fix this?