Hello, I have a valve cover I no longer need. Just been sitting on my shelf for several years. No damage done to it, good shape. Was saving it as a spare if anything happened to mine but I'm not longer in the dsm scene so it does me no good. I'm sure one of you guys would love to have it. Priced...

Hello I am no longer really in the DSM world and I still have parts laying around I need to get rid off. The best way to get a hold of me is to text me at 4404200543. I am located in Wellington Ohio if you wanted to pick up anything. More pictures on requestFidanza lightweight aluminum...

Added few parts and updated list. Lots of unlisted parts, just ask. More pictures on request

Hello I am no longer really in the DSM world and I still have parts laying around I need to get rid off. The best way to get a hold of me is to text me at 4404200543. I am located in Wellington Ohio if you wanted to pick up anything. More pictures on requestFidanza lightweight aluminum...

I have a basically new Fidanza Lightweight Aluminum Flywheel for a 6 bolt awd. I had it installed on the motor I was building for my laser over the last couple years and I unfortunately have to part ways with my build. The flywheel has very minor rust spots on the surface where the disc goes...

Hello I am no longer really in the DSM world and I still have parts laying around I need to get rid off. The best way to get a hold of me is to text me at 4404200543. I am located in Wellington Ohio if you wanted to pick up anything. More pictures on requestFidanza lightweight aluminum...

Hello I am no longer really in the DSM world and I still have parts laying around I need to get rid off. The best way to get a hold of me is to text me at 4404200543. I am located in Wellington Ohio if you wanted to pick up anything. More pictures on requestFidanza lightweight aluminum...

I have a basically new Fidanza Lightweight Aluminum Flywheel for a 6 bolt. I had it installed on the motor I was building for my laser over the last couple years and I unfortunately have to part ways with my build. The flywheel has very minor rust spots on the surface where the disc goes from...

Im getting out of the dsm game. Parts are located in Wellington Ohio, 44090. These parts have less then 300 miles on them. If your looking for more pictures i can text them. Easiest way to get ahold of me by texting me at 4404200543. Thanks for looking.Fuel Injector Clinic 775cc Injectors...

Sold

Hello, I have a 91-94 1g dsm ecu with dsmlink installed. I am going to be out at the shootout all day today (sunday). Text me at 440 420 0543, Looking for cash Thanks.

Im having an issue with my car and im having some problems diagnosing it. I have zero boost leaks at 25 psi. mechanical timing is spot on. ignition timing is set to 5 degrees BTDC, i just installed a new knock sensor because the old one was leaking all the gel out and i thought that would fix my...

the 2g 7 bolt strainer works in a 6 bolt just fine. like 2gmitsueclipse said your pan CANT be dented because it sits lower then the 6 bolt does.

apckofllamas updated BatmobileView updates to this DSM profile...

talk about a thread revival! haha

apckofllamas updated BatmobileView updates to this DSM profile...

apckofllamas updated BatmobileView updates to this DSM profile...

apckofllamas updated BatmobileView updates to this DSM profile...

that is very random but defiantly awesome. cool spot for a picture i thought

I recently had my mechanical oil pressure leak all over my radio and totally fried it, Ive always ran electric guages for fear of my oil leaking out into the cabin. This gauge happened to be in the car when i purchased it and never checked to see if it was mechanical or electrical, i know its...

I recently just acquired a holset hy35 and i was trying to figure out if the bolt on housing for the hx35 will work with the hy35. On extremepsi there is a vband option one and i was wondering if that would work? and if not what should i do in regards to a manifold.

apckofllamas submitted a new DSM Profile :BatmobileRead more about this vehicle here...

yes the slave cylinder does actuate all the way and return. and yes i went through the jacks trans adjustment method. I did notice the pedal wasnt coming up all the way to the cruise switch so i adjusted that to where it hit properly. i did take the slave off and i pushed the clutch fork by hand...

I just bought a 90 fwd turbo laser the other day. and since purchase its been a little notchy going into all the gears. Mainly just 2nd and 3rd you could hear a slight crunch. well i went to take off in it this evening and i couldnt get it to go into any of the gears. Reverse it would grind but...

I have the exact SRS catback on my 1g and when i installed it i didn't run into a single problem, every hanger matched up perfectly. the only thing i made was a test pipe to go between my megan racing downpipe and the SRS exhuast because i didn't wanna spend the money on one. Still no issues and...

I just recently discovered that my rear sub frame was cracked around that bushing. Im really not sure what i should do, i tried searching around and couldn't really come up with anything. none of the junkyards around here have any dsms and if they do there just as bad as mine. Im just looking...

apckofllamas updated 92 Plymouth Laser Street HellionView updates to this DSM profile...

apckofllamas updated 92 Plymouth Laser Street HellionView updates to this DSM profile...

apckofllamas updated 92 Plymouth Laser Street HellionView updates to this DSM profile...

Okay great! Thank you for your help it was very helpful and the response time was even better. One of the few reasons why this is by far my top visited site.

Okay that makes alot more sense to me now, thanks alot. So I just cut that wire and wire right into it and dont worry about the rest of the wire, correct?

I am having trouble figuring out if I should wire in the brown or yellow wire. I do not have dsmlink yet and I have been searching around and cant find an exact answer. I will be running the innovative sensor in the stock front location. Do I just cut the pin 4 wire (white) and wire it directly...

I picked up a 94 talon es and it needed a trans so i figured i could pull it out of my 92 nt laser parts car. I proceeded to pull both transmissions and put my good one into the talon. the only thing that was different were the plugs on the 94 so i cut them off the 92 because the wires matched...

apckofllamas submitted a new DSM Profile :92 PLymouth Laser Street MonsterRead more about this vehicle here...

i work in elyria but i live out in wellington. im currently building my 92awd laser as a winter/spring project. im always down for that kind of thing!

defiantly pick it up, i wouldn't think twice about it. theres actually two of them around me that i have seen a few times. you can never go wrong with a GN

i absolutely love my Innovate MTX-L. i haven't had any problems in the last year and a half with it.

defiantly one of my favotires

1991 eclipse 2.0t ready for rebuild

not a DSM but its still funny 01 acura integra blueee turbo modded

whoever was driving the bronze ish color 1g without a bumper and a massive front mount down nickle plate props because that thing looked like a beast :thumb:

1992 Eagle Talon

i would go with an auto if it was gonna mostly see the track. i prefer to drive a stick for many reasons and if that's what you want i would wait around for the perfect car and you'll be much happier with your decision.

i almost finished my timing belt jib but everytime after i tension the belt and rotate it 1/4 turn ccw and back to realign the marks are off. i've tried a few different things so hopefully tomorrow ill come up with something.

previous owner did the timing belt before i bought my car, which is only about 16,000 miles ago. i guess i would of never of thought to check my timing marks because its ran great since i purchased it. i believe my timing marks are off, can someone verify this? also since im off by one tooth...