Car is looking good!

You are the best my friend! The sticker set is exactly what I needed! I have been using your restoration for what I need for the ins and outs of my return to life of my Talon. Everything you have done has given me the fire under my ass to make my car perfect. I'm going to take out the interior...

Wow! That looks wild and liking the colour of your Talon. I just got my car back from Magnus and he rebuilt and upgraded my clutch with a exceddy stage 2 and a upgraded transmission which was worth every penny. Had a problem with my computer after I got it back from DSM link but they fixed it...

Omg, I'm having the same problem!! I had Magnus install the DSMlink and ever since then as soon as I gets to operating temp, boom wants to stall out kicks and cars like a bag of kaka eventually dying. Wait a bit then starts up and only last a minute or two then repeats. This has been happening...

Well guys car retuned and fixed problems with charging battery in the the hatch (now back in the engine bay), I think boost controller problems. Then I find out me new used HKS 44 mm waste gate four bolt is leaking! Fuzz! Now I need another old school waste gate or new exhaust manifold and waste...

Rebuild is a good idea, clean up the head and rebuild and do all seals and gaskets. I have a completely stock and with cams and every thing else including DSMlink. I just dynoed the car at 380 whp which is a lot of horse power for a stock bottom. Don't cheap out and get everything done right...

Hey brother, it's unfortunate for your engine failure, but you need a little more info. Does the engine turn over? Not sure if you meant the oil filter was torn up? Or throwing oil out? First thing is find exactly where the engine is losing oil. Then fix it if it can be fixed. If not you might...

Hey guys, well not having any luck moving forward on my build. Car was having a problem with charging and with ac on draining the battery and alternator unable to keep the volts up so I changed it. I'm frustrated and stressed out. Still have the hesitation but it's everywhere on the rpm range...

Car has been running all summer and still have two problems one with setting up the spec1 profec greddy boost controller with a replacement solenoid. The worst is a hesitation I have at cruising in third at between 2500 to 4000 rpm which I think it might be dirty injector. I have replaced fuel...

There are shops everywhere, where are you located? 4 hours north of Toronto there might be something. This is to Urban smoker, I'm driving my car and want to see your DSM's (Toronto and surrounding area). I'm willing to travel, I'm meeting with guys I have raced with and now that I'm 40 the boys...

Anybody want to meet at Scarborough town centre on Sunday? Let me know I'll meet any time I have lots of stuff I would like to trade. Send me a message.

Sure, where are you located? We should get some of our dsm guys for a meet.

A lot has changed, I agree dsm boneyard is very slow and can't seem to get there kaka together. I kept the 550 cc injectors and added a 20g cast manifold along with 44 mm HKS waste gate. Marco from Magnus have been friends even while my talon in the garage for a decade. We dynoed my car at 378...

What track? Road course or 1/4 mile? I went to DeSilva racing are there was a couple gtrs but mostly mustangs and corvettes my buddy brought his company car 2014 e63 AMG, 11.70's all day long! This was at Cayuga last Wednesday.

I concur that a 12 inch woofer is a deeper boom that actually isn't louder but more powerful. I can't use a spare so there is lots of room but I want a lower baffle that only a 10 inch woofer so I can use the hatch for groceries or a weekend bag for my wife and I. This new script lost all your...

Running DSMlink v3 and for the last two days tired to change my fuel filter with a universal which we figured out that it doesn't fit. I will get the OEM one Thursday. I'm really not sure maybe injectors might be the problem. Didn't drive the car for ten years just starting up and moving in and...

Does anyone know how to use a aftermarket solenoid 3 port replacement for the spec 2 b controller on a original spec 1 unit? If this is the wrong way to ask questions please point me in the right direction.

Hey guys, I'm having a similar problem and it doesn't happen all the time. My problem isn't happening while accelerating but when I'm cruising in 3rd gear around 3000 rpm and it's not chugging but feels like a hesitation just a small miss. Car did sit for a while and this trying to get to all...

Hey guys, the weather is getting better and my car has been on the road for a while and wanting to see if there was a meet any time this May or June? It would be nice. Let me know if any of you want to meet up somewhere. I have lots of stuff I'm willing to swap but looking for dsm brothers. I'm...

HELP! I hope someone can see this, I'm really having a hard time trying to replace my new universal spec 2 solenoid with only in and out vacuum ports. This new solenoid has three ports, COM, no, on. Do I leave the third open to atmosphere or cap it? It was covered and started making that...

Wow great stereo build! I'm in the middle of my build on my 1g and it will be very similar. I have dropped the sound mat in the hatch and rear seat ares and looking forward to doing the rest of the car, did you notice a big change with the mat covering the car? Was it quieter? Was it worth the...

Guys this forum is amazing just search the site and reap the befits of all the knowledge of the members wise men. Plasti dip for all the trim pieces that are flat black. I'm not a fan of vinyl wraps which cost 2 to 3 grand when you can buy a few spray cans of plasti dip for a few dollars. Just...

That's interesting I'm trying to find a solution for the bottom outside window trim that's peeling. I couldn't stand it anymore but now I'm looking at chrome and it looks out of place. My auto body guy told me use electrical black tape. Uh no thank you, then I thought plasti dip, remove sand and...

Hey guys, I'll look other threads but I live in Toronto Canada. You might think why do I need ac for a place where it snows everyday. Unfortunately it doesn't snow everyday, I love snow with snowboarding and my 2000 legacy outback for driving to the hills. Our summers are scotching with high...

That video jacks has for the adjustment has to have been done in the 80's because it's so blurry and no close ups of the adjustments so really can't do anything with it. It would help most if someone can make a video with close ups and step by step. Don't mean to knock Jacks but that video is...

I'm going to lay the sound proof mat in the hatch and then pick a subwoofer and amp. My friend owns a place in Scarborough un the GTA (greater Toronto area) called Chase Audio. Complete laying of Duramat on the floor and doors box with a wood battery box for 700 ish. It doesn't include the amp...

Great build brother! Getting it back to race condition after they have been sitting can be difficult. Keep us informed.

Wicked setup, I'm in the middle of putting together a best bang for the buck audio system. I have put in a set of JL audio highs a set of crewing vega door mids and trying to build a box in the empty spare tire and tools. With 18 inch rims spare tire is useless. I'm building it in my first gen...

Ya I did it step by step, but my Monroe struts and universal the torx top was easy I just unscrewed the top and screwed on the stock portion I unscrewed from the stock unit. Unfortunately the bottom bracket does not unscrew and not able to remove it to attach it to the new struts. The struts are...

Hey guys I'm not too sure if there is a thread to show me how to change the bottom two screw bottom bracket and attach to the new hatch struts, but I'll start here. I have purchased to new struts from an american parts suppler who assured that they would be an exact fit and after removing the...

That really sucks but there has to be used or someone bought a set and it's sitting in there garage, I'm a optimist. Please if there out there help me and other 1g owners.

Hi guys and ladies if there are any. I'm am doing a build and was looking for replacement projector headlight units. The new light unit is made with new technology and projector style light assemblies. I found the perfect at dash z racing which as tones of headlights for every car and lots of...

Need a car, saw some interesting 1g's for sale. Nice blue 1g here is the link. 1992 Eagle Talon - City of Toronto Cars For Sale - Kijiji City of Toronto Canada. Let me know if you like? Now I don't know if you guys have noticed but a good example of a 1g without being rotted out is harder to...

I'm in Scarborough if any of you guys in the east I can setup a parking lot where my part time job which has at McDonald and Kelsey's which I work at. 20% off all food.

If your not to concerned with the car use it as a ginny pig, but if your not sure contact a pro in your city. I detail cars and there are a few in Toronto that will come to you and fix it. I would get them to do the work and practice on other junk stuff. You could go to the wreckers and get...

This is a great question and I had two installed on 92 talons. The first time I did the FMIC car over heated because of the disruption of the FMIC. I built a plastic flap under the bottom rad support to force air into the rad, because the FMIC changes the air flow a new induction of air needs to...

Interesting, but I would look towards maybe injectors which can cause a ticking noise. If it's more a knock, your in trouble could bearings. Does the tick get louder as you raise the throttle and rpm? Take a video.

This winter seems to be longer and more snow, but I also have a Subaru outback for my everyday car and Toronto has had some good snow dumps this winter and I have been drifting everywhere. I do miss the talon and can't wait till spring I hope the ground hog see's his shadow because I'm ready to...

900wheel hp? I'm stoked, my friend jeremy made 916 wheel hp on pump gas with his r35 ran 9.63 at 148mph. Urban I need to meet you, your crazy awesome! I love the way you have no fear. With awd and that much hp your safe but lately at Cayuga I have been seeing guys getting hit by others on the...

Urban I feel you (not in a physical), having a goal is good and I look forward to seeing you guys excel. I can't believe how excited I am for spring. Maybe I should dial back the pills, I'm too happy.

Faster you go the more money you dump. If your doing it to challenge yourself I'm there for you. I'll document it for you and plaster it all over this place. I'm a grade school teacher and ok with tools but I have friends to do the real work, sorry I pay them too they too they just don't do it...

Welcome aboard, make sure to read newbie forums and tips for searching the data base. Make sure to post comments and tech posts. My name is Dimitrios and if you have a dsm then you made the right choice to become a member. Whatever problems your car will have, all the answers are here for you to...

Hey guys, urban and jery are track rats too. You guys have your own shops? Love to see this much action here in Toronto with DSMers. I'm pumped for this spring.

Well it seems we were both wrong on Marco and Magnus on his site reports 6.83 at 202mph. Here is the link www.magnusmotorsports.com that's crazy. Being the fastest really has no point unless it's your business. There will always be someone faster and with more money. I love cars and driving, and...

Thanks guys and unfortunely, I'm a dyslexic math teacher so I forget to break it into paragraphs. Car is in storage and waiting for my brother in law to bring me oz racing rims that I got from this site. This forum is an amazing thing, I can't believe the power we can get out of these cars and...

In Toronto Magnus is king 7.85 2g, I believe. He's one of the originals in dsm and has stayed there by following his own drum. Some have problems with him, I personally call him a friend. He's been focusing on r35s but still has love for dsm's that are not rusted through.

Hey guys, happy new year! That black out in Toronto this Christmas really sucked most of Scarborough was without power for 7 days I was out of power for 6 days. I was reading this thread and really happy at the activity of this thread. Even though a little competition is good the reason why I...

Hey guys, I know this is an old thread but I'm having an issue with my clutch adjustment and shifting.My car sat for ten years and 5 years ago I started to do some upgrades and got a fluidyne rad. I didn't know where to put the overflow bottle so I let it float, but eventually it fell into...

Awesome guys, I'm glad there are some hardcore DSMers like myself still left in Toronto. Ill friend you guys and we can arrange a meet up. Just wanted to let you know I quit my teaching job so I'm building my part list for spring. I'm also Greek and I work at a Kelsey's in Scarborough, we get...

Hey guys, I am interested in meeting this spring but I live in south central Scarborough right in the hood. I know most of you live in the west end but maybe we could meet somewhere in central Toronto or northern area. It would be nice to have a car meet on a nice Saturday or Sunday morning. I...