Hi All,Over this past winter I swapped the spring set in my Tial-MVR from ~10 psi of spring to ~20 psi of spring. After doing that, I have found that I require a lot more WGDC command to get similar boost levels. Nothing else changed in the system other than this spring change. Same turbo...

This came up in recommended on YouTube, music video from a modern artist with a lot of views and has a 1G DSM shell in it. Not familiar with the artist but a brief google seems to show he is a car dude so this may not have been an accident with the production company grabbing whatever shell was...

1). No boost, vac, or exhaust leaks. None 2). Verify mechanical timing. Timed 3). Verify base timing 5deg factory spec 4). Ignition system NGK BR7ES @ 0.020", new MSD wires, ~1500 miles on new OEM PTU/Coil pack. 5). Motor health ~1500 miles on build, have not taken measurements 6). Basic...

This is the Build Thread for Camaro SS. Reply below.

For sale is a bolt on 20G turbo built by Justin here on the forums.KTS 7 blade billet compressor. 11 blade TD06SL2 turbine wheel. Down firing compressor cover. Internal gate Compressor cover powder coated red and hotside ceramic black by Detective Coating Built with all new parts by Justin...

Interesting video on Haltech's channel going through the 4G63 engine and some history. Just posted a few days ago.

Hello all,I have noticed my car is consuming coolant since switching to the Hx35 / E85 setup. Others have mentioned they see a spray from under the passenger side during a pull, my coolant overflow is on the passenger side of the car. Initially I assumed it was a head gasket issue. This past...

llxkevinxll submitted a new DSM Profile :1997 Chevy S-10Read more about this vehicle here...

Hello,I searched these forums and Google for anyone running a Racetech RT1000 in a 2G Dsm but can't seem to find any pictures. If anyone has tried one let me know. Just wanted to get an idea of fitment before I pull the trigger. If possible.Thanks, Kevin

Not sure if I believe it yet but it's better than no rumors at all.https://www.eightmotoring.sg/2019/07/01/mitsubishi-evo-11-is-confirmed-on-the-way/My worry is the price. I'd love to pick one up brand new, but 350 hp rumored and the last evo was in the 40s new. Hard to justify when...

Hello,Seeing some strange behavior from my Innovate MTX-L wideband when being logged by ECMLink. I have attached two images, one from the end of last year and one from a few days ago, as well as a log from the second image showing the strange readings. The wideband signal used to update...

Hello,I currently have a South Bend SS/TZ kit which has served me well enough but I have had minor issues with slipping after back to back drag passes or in my later autox runs if the field is small and the delays between runs is minimal.To add to this, my car made 264 ft/lbs on the current...

Current setup: -6 Bolt 2.0L -Eagle Forged Crank -Manley 9:1 pistons, coated (effective 10:1 with machined head) -Factory rods, shot peened -King XP Bearings -1mm oversize, coated and swirled, stainless SI valves -Factory turbo cams -ARP rod and main bolts -Rewired walbro 255 -NGK BPR9ES Plugs...

1). Any boost, vac, or exhaust leaks? None2). Verified mechanical timing? Yes3). Verified base timing? Yes4). Ignition system COP or Stock Coil: Stock Goil Wire brand and Age: MSD - 300 miles. Spark Plug brand, type and Gap: NGKBPR7ES. Gapped to .028"5). Motor health (Compression Test)...

I recently had an issue with the car not going into gear while running and clutch engagement was right off of the floor. I replaced the following:Rebuilt master cylinder Rebuilt slave cylinder Full stainless line New OEM TOB New OEM TOB clip New OEM pivot ball New South Bend SS/TZ Clutch and...

Picked up a 1G Eclipse GSX last week. Just got the 2G Talon running this past summer but that is back in Ohio... I had been looking for a rust-free 1G while I was in California and stumbled across this GSX.-Small 16g -Tubular manifold -2G MAF -10k on stock rebuilt motor/trans -ACT 6 Puck...

llxkevinxll submitted a new DSM Profile :92 GSXRead more about this vehicle here...

I went to install my B&M short throw and noticed one the shift cables seems to be missing a bushing or insert. Right now there is only rubber on the end of the shift cable and it does not fit snugly on the pin on the shifter.The portion I am talking about is shown here.ASA gives...

Hello,Curious as to why SIM as the SS/TZ clutch kit for $265 while TMZ has it for $440.I originally thought the SIM listing was for the disc only, but it is described as the whole kit.SIM ListingTMZ ListingThanks,Kevin M

I have been working on this for a little while, figured I would share it with others.This is an Excel-based drag time organizer. It will format and organize your drag times without the need for manual formatting. It will highlight your best times/MPHs etc. and has the ability to create charts...

Just wanted to make sure this is the correct gasket for my throttle body.STM LinkExtremePSI has the part number as: MD146399Thank you!-Kevin

Hello,This build log is for my first DSM, a 1996 Eagle Talon TSi AWD.Update 5/25/2016: When I started this build I had the intention of driving it daily in the summers. That plan has definitely changed as I have gone further with the car than I had originally expected. This car will be a...

I will be doing a 3000GT VR4 brake conversion up front. RTM's website states that some wheels have spoke patterns that interfere with the calipers.Quote from RTM: NOTE: These brakes will NOT fit with all 17" & 18" wheels (and essentially no 16"ers)--the area of interference is rarely the...

I am currently building a 6 bolt with 10:1 Manley's. Any idea what kind of mileage I will be able to get?-Car will not be driven hard when driving to work etc. -Injectors will be stock to begin and will changed as needed, so assume 450cc. -Car is an AWD 5 speed. -Small 16g @ stock gate...

Looking at this turbo - PTE 5130 EXTREME PSI : Your #1 Source for In Stock Performance PartsI was originally looking at getting a Garrett GT3071R or GT3076R, but did not want to go full T3 right away with my car.I noticed this turbo is the 3071R equivalent and is ball bearing. Most...

Hello,I will be buying a Garrett GT3071r with a 3" 4 bolt housing. (LINK - First housing option on this page). Almost all of the o2 housings I see are 5 bolt stock replacement. Punishment racing has this kit --> LINKIt comes with a 4 bolt turbo elbow. That part is not listed on their site as...

Hey,Recently purchased a 96 Talon TSi AWD, the car has the 4g63T motor and has been 6-bolt swapped. The harness is pretty torn up from the previous owners and I would like to replace it. I know the replacement will have to be from a manual car, but will it matter between 1G and 2G harnesses...