Helping a fellow DSMer out here in the Columbus, GA area out. He is asking $100 shipped. Shoot him a text if your interested.
GT4088R Dual ball bearing Open T4 housing 3" vband out Comp housing 4" inlet 2.5" out Low miles, spools fast. need to go bigger for my drag project. Good for 760 hp...
There are a few meets on Fridays and Saturdays in Columbus at the sonic and the parking garage. There are only a few DSM guys that I know of running around.
I live about 20 min outside of Columbus. I dont have any 1G parts but I do have a clean 96 FWD auto that I am parting out. The engine is not going but everything else will be up for grabs.
Well got enough stuff out of the way and found that it is an entire 1g 7bolt engine. Found the original owner had placed a couple nails through the top starter bolt hole and JB welded them in place. I pulled it out and cleaned the hole up and put a new starter bolt in to find that now the...
Ok new update. I ended up running a wire from the ignition harness B/R out to the starter signal plug under the hood. The car cranks. The first time I had to give it a shot of starter fluid, but after that she starts on her own. I havnt pulled the plugs yet but Im thinking they might be...
Ill have to check the MPI relay when I get back to the house. As far as I know its a 95 harness. I was told by the guy I bought it from just the head was swapped. The B/Y I checked under the hood was from the harness side. I will also check the starter solenoid side when I get home. I had...
From the relay harness the B/Y wire to the dashboard frame and door post the resistance is between .2 - .4 ohms. Under the hood on the harness side its like 23k ohms.Went out and double checked I guess I didn't make a good connection but now I am getting a steady 24k ohms at from the...
I have been searching through the forums and have yet to find the answer to my issue. The harness on mine was cut and rigged by the PO. I have 12.5v coming to my starter relay. I have determined that my starter relay is bad. When I jumper the B/R pin 4 to the B/Y pin 5 with the B/Y wire...
Just thought I would check in since I haven't been on in a while. The eclipse has been on hold for a couple months now due to my back completely going out on me. The second round of surgery was yesterday so hopefully within the next month or so I will be back out and about. Just a quick...
OK so I have come across a 1g 4 bolt LSD rear end wth axles and all mounting hardware to add to the list of parts I have for sale. The engine, transmission and intercooler are all gone now I still have The full AC system from my 2g turbo, along with the FWD axles. The drivers side has less...
I'm in EL Paso I have a 92 plymouth laser AWD with a spoiler could you send me a pic of the style your looking for and I can see if this one will work for you. You can text 845 667 6412 for a quicker response.
Heys guys,I have a few parts Im looking to sell to fund the rest of my 6 bolt/ AWD swap.
I have an ACT streetlight flywheel for a 6 bolt, an OBX long route intercooler for a 2G, and a FWD GST trans. The odometer was reading 200k but there was no issues with the trans when it was pulled...
So the GST will be out of commission for a little while. She will be getting a new heart and a bunch of goodies to go along with that. Hey Nate I may need some assistance with the setup for the dsm link once I get everything in and done lol. The holset will be getting put into the car after a...
If you need any vacuum line or fittings let me know I have plenty and also the boost leak tester with air compressor. Oh yeah and an open garage lol. Just hit me up.
well according to tteh post there is supposed to be a waivor in the EPA code exempting us from obd2 and to only do a visual MIL check for cars in that year range I'm gonna check it out when I get back into town it says that any station that fails our cars due to the readiness codes is not in...
Ok so I was bored surfing around on the site and I found a thread about 96098 mitsu cars having an issue with the readiness codes for emissions tests. I'm just wondering if anyone has heard or knows a shop that is aware of this problem and will cut us some slack. I have no CEL but my readiness...
K well I picked up the HX 35 today came off a friends running car and has 0 play in any directions. Come income taxes I am going to be building the new setup aka DSM link fuel and the such if anyone knows of a friend or friends selling I will be in the market for these itmes just shoot me a pm...
Well Ill be heading out in the morning heading back to GA. Got a stop in pasagula miss to help a fellow dsmr putthis hx40 i have sitting here on his car in exchange for his 35. The garage has never looked so good with both dsms parked in there. Ill take plenty of pics and keep yall up tp date...
I just thought about it I would love to be there but I am leaving for GA on the 16th and wont be back in town till next year. I will be coming back with some SRT$ seats for one of the dsms I havent made up my mind which one will get them though.
i might head down there this weekend again just to try since last week was a bust. Also dec 3 el paso euros is gonna be having a dyno day at the tech school its and AWD mustang dyno. The price if im not mistaken will be 30 for 3 runs. hit me up if your interested.
Oh yeah you won, I would have really like to get it on the track though lol. Maybe this coming up friday Ill be able to see what this ole girl will do.
k sounds good I should be able to be there. I have a buddy whos brother in law says he has a stock M3 that will kill my gst so I wanna see what I she can do now that the boost leaks and motor mounts are fixxed.
anyone heading to the track friday or this weekend. I should be good to go now that we have got all the boost leaks fixxed. I wanna see what she will do now.
that was your spyder on the side of 10 I was gonna stop but I didnt see anyone in or around the car. That sucks if you need any help let me know its not that far from post and I can bring some tools.
its random sometimes its high like around 1200 then others it will drop to like 200 or 300 barely running. and sometimes when I leave a light it will fall on its face and then take off like a bat out of hell. A buddy that has been in the dsm scene says it sounds like a boost leak. Which...
Does anyone have a boost leak tester that I may be able to use for a day or so I am finally getting around to checking this thing out fully. The plugs were done guy had autolite platinums in it so out went those and in went the ngk plugs but Im still having some issues with the throttle...
Yep thats the one. It is a guy that I work with so it wasnt really for sale I just mentioned I was gonna sell an integra I acquired and he said he would sell me the eclipse for 500 so I sold the integra that night.
If you havent got your suspension done yet you can go to autozone and rent a compressor and when you return it you get your money back. Hell the price of the compressor itself isnt bad I bought mine a whiole back cause I used to do alot of suspensions back in ga. Its jacked and needs to be...
sweet thanks alot my number is 845 667 6412 if you could give me a call i will be available all day making a junkyard run looking for new toys and finishing up the headlight polishing
i just need to get rid of this one my idle is acting stupid I just bought the car from a guy trying to look cool for $500 and this is the last part i need to get rid of till I can get the gm maf so that it will act right
Cool Im stationed on bliss is there anyone elses here I know i seen at least one other turbo here. Also not sure if this needs to be posted here but is there anyone that has a factory recirc valve they would be willing to trade for a turbo xs RFL style one.