The high limit will only be a problem if you adjusted the gas pressure and/or the fan speed has been changed. My guess is your fan speed has been changed. If you have a temp sensor like the ones used for cooking you can put it in the ductwork directly above the unit. You should see a temp of...
The injectors do not output in a linear line so you cant get idle,crews and wot perfect. You have to choose the two that you want and live with the other being off a little. If you do a wot pull and it’s lean then change the global intell it gets in line.
Finished the motor mounts today. The engine is officially in the car. The hood shuts with 1.5” clearance to the hood. Time to start on the rear sump. Bought melling oil pickup #68-3s. I read that it was the same size pipe as the 4g. Well it’s a little smaller but it is close enough. There is...
Been working on the adapter plate. This thing fits like a glove. Bolted it up to the engine and put it in the car. The motor fits like it was made for this car. Now that I have the engine connected to the transmission i am making engine mounts.
Install it in the o2 sensor position. Then you will need to go into link and simulate o2 with wide band. Make sure to calibrate the wide band befor driving the car.
Second everything tametalon said. Is the tac showing that the engin is turning over. The way that it was making sounds could have been idler bearings going bad on timing belt causing it to jump timing. Check timing at tdc. If it’s off you probably bent valves unles it’s off one tooth.
Are you new to DSMs or just link? Ecmlink has a ton of start up info on the web sight. What kind of guidance are you looking for specifically. Do you have it installed? Have you connected to it. Do you have a wideband a/f gauge? If you don’t it will be harder to tune. If you have connected to it...
This was my first shoot out as well. It was great to see that many DSMs in one place. It was also interesting to see some of the venders and racers face to face. The guys from fp and fic where informative.
I tried apps( including gas buddie)And drove around for hours going to gas stations. None of which had e85. I posted this so other people would not have to look. This gas station did not show up on gas buddies search my wife found it taking kids to soccer.
I was trying to find an e85 pump in Jacksonville/ st. Augustine area for a long time. Finally found one in nocatee. It’s a gate station on nocatee parkway and Davis Park RD.
How many mile have you put on the new engine since you had it installed? Are the injectors stock? Do you have to add coolant? Leak down test could tell you a little more.
Well it looks like I will need to take the car back with the new setup. changes made are jmf drag, q45, custome 3 inch pipe, catch can, battery reocation tray with miata battery. This was my first atempt at welding aluminum pipe. Looks kind of crappy but it holds 25 psi.