Hello guys, i don't know where to start, i don't wanna get everyone bored here.I did an engine harness to a member on here(Not gonna mention names), he called me an said he did not like my work (keep in mind i've done 32 other harnesses and no one its complaining). He got it within 8 weeks...

Hey guys i noticed there is not a whole lot of information on A beam and X beam rods in this forum, there is some I beam info though. I don't wanna sound rude but please if you don't have experience with either rod or you don't have some useful information, then you know your information wont be...

First of i know that you click on the thread to protect your DSM belief. JK ROFLAnyways, this not the the typical newb question on what is faster? Who would win bench-racing thread, second we are not in an s2000 forums, but all i want is a discussion between the two.I currently own both of...

Well i have lots of my free time now, i have the money and the time now, so i was thinking if i should offer wire tucks services for the people that don't have the time or simply they don't want anything to do with the wiring. You would be able to choose what sensors to keep, since i don't...

Allright so im moving to H-town. i have less than 10 days to move my ass from here. i need to find a house with a garage (why) ### dont want to sell my 2g and just keep the s2k, but is very difficult to find it from here. I got all of the money but no credit. its not bad but i haven't bought...

I want opinions on different ways to tune to compensate the extra flow of cylinder #1 on our motor while running and aftermarket intake manifold like the JMF/MAGNUS with DSMLINK or any non ajustable per cylinder ems.I'm runing e85 and the air/fuel ratio for a deadon tune is 12.8 according to...

My friend took this pictures a couple of days ago i just wanted to share with you guys. :rocks: too late for calendar entries. :(My best time so far is a 11.42 at 131.9mph 1.92 60ft (DAMN WEATHER) maybe next year deep 10s. :D

Here are the pictures...Sorry for all the dirt!!! :p

What would happen if i don't put the coolant lines that goes to the FIAV on the TB? just loop the lines in the water pipe, and plug the nipples of the TB.

In my opinion is the best looking laches location i had ever seen, but i cant figure where is the pin drilled, i believe its near the headlight in the support bar but not sure. Anyone know if she is on the forums so she can tell or someone else please.Not to far away not too in the middle...

I have an hour looking for a picture of some 17x9 wheels mounted on some 245/45r17, i need to see how how they look on the rim, just this particular tire "NT555r drag radial".help me out please, doesn't matter hat car is it or what wheel. :pray:

Does a Deka Etx14 battery would be enough for ours cars? i mean i got one on my S2000 and it works good. Evo guys have this on their car and they work succefully, battery is just 11 pounds!!!Don't come here an tell me to buy parts to go faster instead of loosing 30 pounds on the battery...

Does a Deka Etx14 battery would be enough for ours cars? i mean i got one on my S2000 and it works good. Evo guys have this on their car and they work succefully, battery is just 11 pounds!!!Don't come here an tell me to buy parts to go faster instead of loosing 30 pounds on the battery...

Whats up guys, so all September i was preparing my car for the first annual DSM-Shootout in San Antonio Texas. I street tuned the car the night before the event and went to bed till 5:30 AM and woke up and hour later :| I got tuned my car perfectly for my taste and went to the 2 hour drive to...

LOL YouTube - ‪Vaughn Gittin Jr. drifts a Carl's Jr. parking lot‬‏

I restored my headlight and clean the car a little bit more, so here they are. :DI like this one personally.Churches FTW!

LOLI decided to took some pics while a was at the gas station, i still need to restore my headlights and clean my winshield. I installed my ARP extended lugnuts, Brembo drille rotors, and Racing Composite Titanium lugnuts and a couple of other things.Let me know what you guys think...

Any 350z/g35 owners? I have bunch of performance parts like Coil-overs, springs, rpf1s staggered wheels, test pipes Nismo 3 way LSD and everything is brand new and ill let it go real cheap. I'll post them in the NON-dsm classifieds but i just wanna know if it is interest here, don't want to make...

I have a 2g, had anybody used a JMF/Magnus manifold with the PR Fmic kit? i'm planing to upgrade mine and get it for a 2g head and 1g TB opening and install a New 1g turbo TB i have laying around.

I posted this on the electrical forums and never got a response.I have a 95 gsx my vss connector have 3 wiresyellow (ecu) black black/white stripeI know the yellow one goes to the ecu but what about the black and black/white stripe? Which one is ground and which one is power? Do...

I have a 95 gsx my vss connector have 3 wiresyellow (ecu) black black/white stripeI know the yellow one goes to the ecu but what about the black and black/white stripe? Which one is ground and which one is power? Do they connect to the ecu also?

Here is part 1... :D http://www.dsmtuners.com/forums/photoshop-photography-forum/387079-photoshoot-95-gsx-fresh.htmlI change some stuff and took some more pictures on the same spot.I'll post more in a couple of minutes.

Tonight i was tuning my car, im running E85 but after around 4k the car start to sputter, but how can be that possible if my air/fuel mixture is exactly 12.3 and my timing on top of 4th gear is around 24? Everything in the log seems ok and it evens keep going without any count of knock. I know...

I'm curious about this, i ground the timming via dsmlink and then started a log an took a look at the timing its says solid 5.2. How accurate is that for setting base timing?

Anyone running this turbo? im installing this turbo today but i cant find what is the size and threat of the turbine housing where the 02 housing goes. I tried m10x1.25 and m10x1.50 but no luck, please if anybody knows let me know i just have today!!!:pray:

I have this AGP 50 trim t3 JB turbo with 400 miles, my buddy had it on his srt4 it made 554whp on his car with meth i believe, after that i put it on my 1g and it fits even with the 60 degree elbow i just twisted the compressor housing a little more, i never turn it on or even finish that car...

So i sold my Nissan 350z NISMO GT LSD online, i sent it through UPS ground in the same package it came with from Nismo same box same insulation everything. They #### it up, the package came back to me and everything is fine but they repackage it worse.Anyways the lip on one bearing is bend and...

Would this fit our 2gs? http://www.jegs.com/i/ARP/070/100-7716/10002/-1?parentProductId=747558The kurl is the same .565 but i just want to make sure, if your asking why its because i got an unveliabebale deal on a set of Racing composite lugnuts which are $250+ and they are x1.25. I know you...

Top Gear Hosts Are Straight Up Racist | TuVez Top Gear Hosts Are Straight Up Racist | Check out videos, photos, girls, gaming & gadgets at TuVez!Never expected.

http://www.youtube.com/watch?v=GFrPjMVhP04&feature=player_embedded:|

My speedometer wasn't working so i replace the speedometer and the speed sensor and my cluster still reads 0, i tried 3 different sensors and 3 different clusters with no luck, i also used a test light and the wiring is getting power.At this point i'm clueless and i would like a little bit...

I finished my built 2 weeks ago, i took some pics of my cars to share with you guys.:DMy built blog is "95 gsx built" if you guys are interested on checking them out.I'll start with a epic one. LOL I wanst kidding when i said that i love her.

i started this built 2.5 months ago, I just wanted to share with you guys.

I was never a fan of F&F movies but this one actually looks pretty good "at least on the preview.The Fast Five Trailer! - ComingSoon.net

I got an Autometer short sweep electric oil pressure gauge, i remote mount it in the firewall but its not reading at all. Should the ground that comes out of the back of the gauge be grounded near the gauge? or its OK inside the cabin? also should i ground the body of the sender because its not...

should the ground that is attached to the bellhousing/starter bolt goes to the battery - terminal or can be grounded on the firewall/chassis? My battery is on the trunk.:)

Check it out, i heard Paul Walker is doing his on stunts now.Fast Five (2011) - IMDb

I just want to say goodbye to my gst.:cry: 96 Mitsubishi eclipse gst with 75k, This car get me into the 12s and was my daily drive without leaving me on the side of the road not even once.:) I never paid attention to the look of the car( gotta love smoke honduch and v8s on a primered car)LOL...

What is the name of that thing that bolts on the crossmembrane to the chasis? the bumerang shaped thing. I cant remember! :|

I don't know if this is the correct place to post this , but i'm gonna start to do something in this month, Many of you might know me and many don't, the point is i got a CNC machine ,and im gonna start to make spark plug covers with letters machined with a CNC machine.I'm gonna start with 5...

My friend is doing this to his 1gen, he got the pic from here but this is how its gonna be when its done, exactly like this. He is the best when it comes to custom fibrication, carbon fiber and shit like that.

I'm moving to Mooresville north Carolina in like 14 months to go to a Nascar school :D, I'm posting this because i have a couple of questions about the climate, is there any snow there, e85 stations, smog?I didn't posted this in the nor cal region forum because i might move from there if the...

Many people had been discussing how to get rid of boost creep, and/or how to run stock boost on a 14b/16g since they don't have the supporting mods or they just cant afford them. This was done for my friend by me, he didn't have the money for supporting mods at that moment, this write up is for...

Should i reuse my Cometic MLS head gasket? i was looking at the gasket and the black thing on top is missing on some spots, i think i should be OK since lots of people had reused their MLS head gaskets.Here is a picture, also what should i use to clean it?

I'm running 2 12'' Mishimoto slim fans, when i didn't have A/C the car never overheated, but now that i have A/C my car overheats slightly on a red light after a 20 minute drive in a + 100F weather.Since i don't have too much space in there, you guys think an A/C stock fan in the passenger...

I have an E316G and planning on using E85 + meth, i know alot of people say is overkill but that people had never tried it. :toobad:anyone that have done this in here? i have seen it in an evo and A 1ST GEN i was thinking in 80% meth and 20% water, since water contaminates e85.to hold more...

I have an E316G, i want to turn up the boost at 28psi, i had it at 25psi that's the most i could run with meth, now I'm gonna be running Meth with E85. :DIf i remember correctly my E316gG hold 25 psi almost to redline so i would like to know what can i do to hold more boost on my 16g? before i...

I think this is a new one, you guys think i can convert my evo 3 16g to FP 68 hta??? i mean if i send it to FP? :hmm:i paid 800 bucks for my evo 3 fully ported and everything and its only 150 miles, thats why i ask.

I remove everything from my perfectly running late 7 bolt 5k miles forged internals engine. the car was running perfect no oil issues and no knock or anything but i found this.this bearings is the one in the gridle side. looks like its taking the shape of the bearings on the block side but...

i have a 7 bolt eagle rods with 10k on motor i didn't torq them but i think it was done the right way. now i remove the rods to check the bearings and clean the pistons but im not sure how to re torque them back, i know that the first time u torq them u need to torque them 3 times to stretch the...