Where to start from now?
My 1992 talon was stolen March of this year. I just received a letter from the police regarding it was found on October 29th and is in impound - additional notes said "appears to be stripped and may not be drive able"They want almost $500 for me just to get it out...
1g door panels for sale. They're automatic window ones. Switches are still intact.I'm looking to get $119 for both and I pay shipping!I also have both driver and passenger interior door handles, both for $25+shipping.If interested let
Me know via text 360-601-7716Thanks!
I have for used tails lights from a 1991 1Ga.If interested please text me at 360-601-7716 and we can work on a price.FYI - buyer pays all shipping fees.Thanks!
Selling a used intake manifold from a 1991 talon Tsi.$45 firm -also buyer pays shipping/Paypal fees.Stock side mount intercooler, used- $10+ shipping/paypal feesIf interested text me at 360-601-7716 regarding the part.Thanks!
i have both door panels from a 1991 eagle talon Tsi.I'm looking to get 160 for both OBO plus buyer pays shipping, if you want to work something out let me know. 360-601-7716
i have a 91 1GA red. Every single part is most likely for sale and anything to large to ship will be local pick up only.Gone/sold:
Motor
Transmission
Transfer case
Some interior panels gone
Rear seats
Injector resistor pack
190 Walbro fuel pump (pending sale)Still has:
Gray-ish quarter...
all I have left is the Cam angle sensor, used in working condition.I'm looking to get $30 FIRM plus buyer pays shipping fees. (Shipping comes to $8 so total would Ben $38 via paypal! Not bad for a CAS!)Can't beat a deal like this! If interested let me know right away! 360-601-7716 let me...
1g power transistor ($25)
1g coil pack ($10)
1g CAS ($65)All are in working order. I will take $70 for all 3 as well as buyer PAYS shipping. OBO slightly on price, let me know. I can also separate if wanted (see prices above for individual purchase, these are firm).You can message me here...
I have:
power transistor
coil packBoth for 1g dsm.Selling both for a total of $25+ buyer pays for shipping! (Can't beat that when transistors are almost $100 new!)Looking to rid of these ASAP as they're just sitting and I no longer have my talon (stolen March of this year)Text me if...
I have a 1g power transistor for $50 + whatever shipping fees cost.I also have a 1g coil pack, I’ll do that for $10+shipping.If interested let me know.
I’m having an issue with slight seepage around the entire surface where the block and head meet (the valve cover does leak but not an extensive amount). The HG and head was done about 3 years ago, I burn/lose some oil from leaks outside of the motor but just pulled exhaust manifold and all the...
Man, I’m on my second set of rubber cased throttle body shaft seals. Each time they pop easily in with no problem, when I go to slowly slide the shaft through all greased up the seals pop out which confuses the heck out of me. Can one someone shed light on why this keeps happening?The area...
Hey, have a buddy’s 90 talon tsi that for some reason out of the blue is not starting.Car is stock, no engine management/tuning besides my MMCd loggerChecked:
Spark -confirmed
(Spark plug gap correct)Fuel -fuel pump turns on while cranking, new fuel filter, injectors spray fuel from the...
hey guys,I'm venturing out of the newbie section! LOL, anyways I got my laptop palm emulator and MMCd hooked up. I was getting HORRENDOUS amounts of knock until I adjusted (retarded) my CAS. After that knock sums have decreased significantly. My question is, I still see small 1 or 2 counts of...
I'm logging with MMCd and I reset the ECU to start fresh but no matter what my fuel trims go lean.. low is 137%/Med is 112%/High is 108%. The car is stock besides larger 16g (14-15lbs but going to turn it down to 12) turbo and a lower honeycomb removed from the stock MAS (The VC breather hose...
Wow, I feel as piece by piece the car is falling apart LOL. Do I need the plug in part from the wiring harness to the o2 or can I bypass that completely and wire just the o2 up? I think my wires coming from harness side are messed up. I jiggled the plug and I saw random .01/.03 volts or it would...
hey guys, new to logging and just going over some info. During my drive to Work per the log I noticed my o2 sensor stayed pretty consistent at .01v, one time at deceleration it jumped to 3.35v. My fuel trims are 110/100/100. Is this confirming a bad o2 sensor?Thanks.
(What are the best...
hey guys, I have the palm OS emulator and have browsed over several threads but couldn't find an answer. How do I either install/copy the MMCd program for it to show up in the palm emulator home screen?much thanks!
I’m looking for a data logger or data logging cable.-Palm pilot and obd1 cable
-USB obd1 cableI’m in search for it ASAP! Let me know, thanks!360-601-7716 text is fastest way to reach.
Do I need to cap the hose from the intake manifold and run the pcv line to a catch can and then recirculate from the breather on the VC?I’ve done this and wondering if it’s acceptable. I’ve extended the hose off the Intake manifold and installed a check valve and then connected it to a hose...
I was wondering if these rubber grommets would be a fast replacement for leaky insulators into the cylinder head. Read some previous threads and people have said they work decently on stock 450cc injectors. Can anyone chime in?For $4, If they work, can’t be beat for that price!!
Hey, my buddy has a 1990 talon and he’s having issues with his linkage on the transmission. He says he has massive amount of play on this part of the linkage circled in the green. Would this be fixed internally by pulling apart the transmission?Thanks!
Hey, so I’m pulling apart my throttle body to do shaft seals and gonna refresh the lower FIAV area. I’m just doing it stock but I have a question about a clip with a bolt, does it need to be in there or can I remove it?
Yeah, so, I'm thinking of purchasing a archos 9 windows tablet for cheap and wondering if I could use that with the USB to obd1 to view some diagnostic stuff. Can anyone chime in regarding if you use a tablet for quick view with like RT tuner pro or mmcd, thanks!
I got my other issue resolved regarding car dying and not wanting to start/idle/drive. I was able to complete a BLT and found a major, major leak at the BOV (not the gasket where it mounts but the actual valve inside) with as little as 2 LBS of air. It's a 1G BOV and is slightly crushed.I've...
It seems all but impossible to find a 1g used MAS. I have 560 injectors (not installed) and a 2g maf laying around just needs a pigtail and wired up. Would the 2g MAS/560cc injectors cancel each other out? Or would it make the car rich to the point it's not driveable?
Thanks!(No logger at the...
as I sit on the side of the road writing this, my car has stalled and doesn't want to start. Mechanical timing is correct and in getting fuel/spark. This happened yesterday, replaced the TPS and it seemed good for about 13 hours. I got off work at 4 and car started normal, ran fine and then once...
So I replaced my MC and SC with aftermarket non oem. well my master is leaking after only 2 weeks of use. This is a daily driver with stock hp and a stock excedy clutch. Can someone please shed some light on why this keeps happening? I understand their inferior but still....2 weeks only? Not a...
This mainly pertains to bleeding the slave itself. I'm confused on a simple procedure that shouldn't be confusing. Bleeding the slave,I've read many different posts stating with the clutch pedal in normal position to remove the bleeder screw on the slave and then push its rod into the body to...
Hello,I'm looking to buy packs of 5+ crush washers just to have as back up.
Oil feed from the head/slave cylinder is a 10mm crush washer?would this ID/OD work for the slave and oil feed from the head? does it have to meet a certain ID or just "10mm" overall?.403" I.D. .585" O.D. .045"...
Hey guys,Got an issue with a 1990 TSi no start. What has happened so far, turned it over Dec. 2016 and it ran for a short period and then timing jumped and bent valves. Fast forward, the head (complete different spare) was replaced two days ago and now it's acting like it doesn't want to...
Hey guys,I've seen at least, 5 if not more (definitely more) threads regarding the oil leak by the manifold stud/s. The only thing is most of the posts said "well, it's some of the studs" or "it's the stud in the center". Can someone point me in the right direction as to which specific Exhaust...
I switched out some raggedy 16" wheels/tires for some I'm assuming evo 8 wheels with Michelin tires. The tire is a 245/45/17R. I've checked the strut it doesn't seem to touch or rub. Will these be an issue to run on FWD daily driver? It's stock suspension, not going to be lowered at all.Thanks.
First off thanks to everyone and anyone who participates on this site!Okay, on to the issue. All four struts, Tie rod ends (not sure about inner) and Control arms are worn badly as the car is reaching 208K miles, a small bump in the road makes it completely shake and bounce. I'm unfortunately...
I have the OEM part number (MD145038) for the Engine coolant outlet gasket (T stat housing connected to the Head with 3 nuts/stud) but I'm trying to find if FEL-PRO has a gasket for that instead of ordering online and waiting. I know that you can just purely use RTV but I'm not going that route...
my brother has a tuned MR Evo 9 and it's on 92 octane pump with that 10% ethanol crap. We've found a gas station nearby us that only pumps pure 92 octane. Would that throw off his tune if we decided to use that instead?Thanks in advance
:dsm::laser::hellyeah:Thanks to everyone who contributes on this site and helps keep alive or restore our DSMs! Much appreciated!!Pacific North West DSMsROFL:applause::applause:
So everything's great with the car besides little leaks here and there that I'm getting at. I do have one thing that's confusing me a little, my HG has a little bit of seepage all around it but isn't burning oil/coolant. No overheating, should this be an issue to worry about extensively? The HG...
Hey, so everything is going a little better with the car. It's driveable now. The issue I'm having is the freeze plug on the back of the block, behind the starter is leaking causing fluctuation in my temp gauge but not overheating. It's a real pain trying to get to that plug, let alone pull it...
Hey guys, I have attached a picture below for better reference. The part circled in red is where I'm leaking. Whats the best way to go about this? I'm trying to get rid of most if not all my leaks everywhere. Thanks!!
So I am replacing a few gaskets, the car ran like extreme crap. The manifold was glowing red and I was running rich not even boosting. I'm stock besides a fmic. Anyways, my turbo was leaking from the clamp that holds it together, as well as the manifold to turbo, and o2 and downpipe donut. it...
So, I have this extremely annoying problem. The car struggles to accelerate most of the time. It will build full boost (14lbs) but have no power and I can feel the hesitation. When cruising and not in boost with the gauge around -10 in Hg I can feel it like hesitate and right then if I WOT it...
What the hell kind of repair is this to the damn ecu?Never checked it but it's been in the car for at least 4 years and I like just broke the "void warranty" band around it and I saw a big mess. Doesn't look normal, can someone more experienced with this stuff help me out?Thanks