The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support Morrison Fabrication

base timing connector?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

goonie

15+ Year Contributor
251
4
Mar 2, 2004
soutomaior/spain, Europe
hi there
can someone tell me wich connector i have to ground to set base timing?
i found a thread that said a yellow with red wire
my harness has two connectors
one is a black wire with white stripe (closest to the battery)
the other is a white wire with black stripe (closest to center of the car)
its been a while that i worked on the car so cant remember wich is what?

see pics

car is a 1G 1990 gst

thnx
 

Attachments

  • IMG_7527.JPG
    IMG_7527.JPG
    46.2 KB · Views: 66
  • IMG_7528.JPG
    IMG_7528.JPG
    46.8 KB · Views: 100
the (white/black) wire should be for engine speed adjustment

the (black/white) wire is for the fuel pump check

should be a (yellow/black) wire for the ignition timing adjustment

You must be logged in to view this image or video.
 
You must be logged in to view this image or video.
 
You must be logged in to view this image or video.
You must be logged in to view this image or video.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top