Thank you for all your help! I didnt know that the ignition switch was connected to the automatic shutdown relay. So i got a new ignition switch and before i installed it, i found a very very poorly sliced and i guess an attempt to be fixed by the previous owner so i fixed that and havent had a...
Would the ignition switch be doing this? i didnt check that yet, if its shorting out and thinking ive turned the key off it would tell the mfi/asd relay to turn everything off and with it shorted out it not register that im trying to crank back up? Or starter relay messed up? Is the starter...
The cam sensor was taken off my wifes 98 420a that runs fine with it, and if it was the cam sensor, it wouldnt crank up and run fine every 6 to 12 hours would it? Or would the cam sensors values not affect anything for a few minutes? Same with the crank sensor? And thank you all for helping me.
I have been running the 4g63 coils for a year with no issues till now but i dont think the issue is the coils. Ill check the speed sensor tomorrow, although i thoight that only went to the odometer? Probably the ecu too, since you can see the speed with certain obd2 scaners.
No spark or fuel. And theres 1 power wire that splits for both coils on the 4g63 and 420a stock coils and theres 1 signal wire for each coil (a) and (b) on both 4g63 and 420a. So i wired in the connectors for the 4g63 coils useing the same wires from the 420a coils. Pretty easy and i dont have...
Ive been stuck on this problem for 2 weeks now.
Manual
Egr delete
Cat delete
Actual cold air intake
Full exhaust
Full rebuild
4g63 ignition coils and wires
.020 oversized 9 . 1 pistons
BC 264 (i believe, cant remember) cams and valvesprings
Ported throttle body
Ac delete
Powersteering delete...