Depends on your set up I guess. You have a wideband you are logging? What MAF or speed density? I live in Omaha despite what my profile may say.

CAS is just plugged into the 2g harness with the adapter harness.I switched the wires running into the coils from the coil pig tail to the two coils. When switched the other coil fired and the one that was firing before does not.I did not ensure that it was not 180* out, I didn't think...

6 bolt swap completed. Primed and then cranked to start. Wouldn't stay running, didn't sound smooth so I checked for spark. Missing spark in 4 and 1. Switched the wires on the back of the coils and lost spark in 3 and 2 and gained it in 1 and 4.I lengthened one of the wires from the...

Good find. Not a surprise they are sold cheaper. I didn't look around because I'm close to MachV and wanted them that same day. Hopefully I never have to replace them again but that info is good for someone else.You don't need to touch them for a simple swap of the struts/springs. I'm...

They are a pain and I'm not ashamed to admit I cut my last set off (everything on the front suspension was a rusted mess).I replaced them with the one's that MachV sells for $26 a piece for the fronts and $25 a piece for the rears. I am 99% sure both sets were Beck/Arnley.End links-T

That was the passenger/camerman/friend. Not the owner.Head. Missing something?There it is!-T

Don't worry about dsmlink. If you don't know what makes it such a slick thing to have (like the ability to run big ass injectors without issue) you shouldn't drop down the 700 + depending on the laptop you buy to run it.-T

Machv.com does no tuning. They are housed in the same building as Ultimate Performance and if you take your car to MachV for tuning it will be tuned by Jason Hunt who works for Ultimate Performance.If you don't know who Jason is you can read up; he is more than competent.On the other...

Ebay was the cheapest I found about two months ago.-T

I have no clue about the cyclone. Although I feel that it would be a pretty stupid thing to do.The 1st generation intake mani has very large ports to match the 1g head. It will not bolt up to your head.-T

Sorry to stray too far off topic but...You live in Seattle and you dare to call East Coast cars rusty??Feel free to walk outside to your neighbors car which he purchased at the local dealer ship (don't forget your raincoat!) and see what Washington state does to cars.-T

No...not obvious?I'm a psycho I guess.-T

No doubt...I would own that car if they made it.Not a watered down sissy version...but tha tone shown right there.-T

The denso makes an oxygen sensor that handles leaded race gas. I'd look for something like that.-T

Would be a good time to do the waterpump. Since you'll have the timing belt off.-T