Added a Moroso 3.5” spiral flow to the exhaust system yesterday to help tame it down some. Took it on a quick spin this afternoon and it has helped, drone not near as bad around the 3-3/5k rpm range.Not sure if it is a coincidence but it...
Corbeau makes bolt in seat brackets, or at least they used to. Easy install, had to remove some washer/spacers in the brackets to lower the seats a bit.
Yes they were, and fairly lightweight. I pulled them for a couple reason, I am trending back to a more OE look and the seat mounts jammed the lap belt latch into center console.
I’ve always heard people’s opinion on that turbo as being one of the best street turbos ever lol, I’d say unless your after more power I’d keep it, especially if fp can rebuild it :rocks:
Thank you. Doing great, one of my dilemmas when this needs to be rebuilt is what route to go. From my understanding FP can’t really do any upgrades other than a rebuild. I have been eyeing the MorrisonFab compact Vband set ups, different FP...
Here's my setup I put together over the winter:TRE welded 1/2" NPT fittings on the transmission
Setrab 50-619-7612 cooler
Marco UP3 164-020-12 pump
Mocal AF8_240 filter (240 micron)
XRP -8 ProPLUS PTFE hose/fittings
Controlled by RaceCapture...
Finally got off my ass and finished the plumbing on the new catch can set up. Kids, sports, life and work always getting in the way:rolleyes:Next is a paint correction/cut buff, contemplated a lot of doing it myself but it would just take...
Been on a Setrab for many years. Looks like something comparable in the size you linked is more, around $250.https://www.pegasusautoracing.com/productdetails.asp?RecID=8949
Well my shifter stuff was here and it’s a pretty day, so I wanted to do one last thing before I go back to work, and that was install it all. To say it makes a huge difference is an understatement like a hydrogen bomb explodes kinda big.But I...
Finally found some will to repair the car last week and took it out this weekend for the first time in half a year.
I think I needed that break because I can't think of last time when I enjoyed it this much.
Took some photos of it during...
Been trying to keep up so if this has been done or mentioned, carry on.Have you tried adjusting the clutch rod on the inside? Is the clutch grabbing right off of the floor?http://www.vfaq.com/mods/wayback/clutch_adj.html
So another stab at cleaning and reapplying double sided tape did nothing. Here's what I made, using a piece of an old windshield wiper refill.And a little black paint:
Transmission has been dropped, and put back in with new shim on the ball. In person there is a slight concavity outwards of the fingers. They’re not super flat like the picture shows. But time will tell if this is fixed or not. If not then I’ll...