you'll have the problem with smaller pumps as well from what people have been posting ... it's a simple mod .. I was super nervous at first but you'll get it easy ... remove the plastic piece from the hanger , drill it , pop it back your done ... I do have extra piece/whole hanger assembly...
Yessir worked like a charm ... it's a little difficult to see the difference by eye ...just measure the drill bit/verify size is 1/8 ...if the bit fits thru the hole ...your good ...very hard to tell you made a difference after the mod ...but yes pressure restriction has been significantly...
Yessir it is ... I'm gonna try to get it done within next 2 days ..ill give you some feedback ..... Thanks alot!! I saw the siphon mod and feel more re assured that it's the issue
I currently have the same problem with my walboro 450LHP new model with the pressure relief built it ... Automotive 1000 is now on the car after going through 2x fuel lab 515 series regulators (did not fix my issue)... Could someone please give more details on this siphon mod or other issues I...
could you please pass along the information of the rewiring the plug and play adapters ...I am having the same issue and have submitted a email/ticket to mishimoto(with this post referenced ) with no response . I am definitely having this same issue . Thanks !
New member here have two cars ... an 89 mirage stock 6 bolt swap fwd and a recently purchased 97 gsx. The eclipse is the first car I'm planning on building for hopefully near 500 awhp. I plan to 6bolt swap the 2g (automatic btw) and upgrade to a Holset hx35 with supporting modifications ... a...
yes the turbo is usually fed from that position but since I had nothing to block off the filter feed I just blocked the other two ports on the turbo and fed it thru there . I'm not sure on the fuel pressure regulator lines . I'm having a local dsm buddy take a look for me today . The linkage and...
so these are some pics of the soleniod , actuator , maf and vacuum lines ... there are vacuum lines from the manifold going to the soleniod and the electrical connection is in , haven't checked the linkage just yet since my schedule or weather is not cooperating .. Hope this helps you ..help me...