The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support STM Tuned

ECMlink 2G New fic injectors injbattetyadjust question

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CORNF3DECLIPSE

Probationary Member
23
3
Jul 28, 2018
LEWISTOWN, Pennsylvania
I got new fic 1220 injectors and I was checking out the chart they provided for voltages. Do I just copy what they provided and put that into injbattetyadjust? Check the picture i just wanna be sure i never did it ths way before.
 

Attachments

  • PSX_20190112_103401.jpg
    PSX_20190112_103401.jpg
    447.9 KB · Views: 156
I
I got new fic 1220 injectors and I was checking out the chart they provided for voltages. Do I just copy what they provided and put that into injbattetyadjust? Check the picture i just wanna be sure i never did it ths way before.
I got new fic 1220 injectors and I was checking out the chart they provided for voltages. Do I just copy what they provided and put that into injbattetyadjust? Check the picture i just wanna be sure i never did it ths way before.
Yes, but also read the link above.
 
I got screwed up somewhere. I'm at work right now but I put the voltages back close to stock because it was really rich over the weekend. But my global deadtime is at 365, my speed density table is screwy though and the highest cell is now 115 but its drivable.

So should i zero out my global deadtime and use fic's volatges for injbatteryadjust?
Also what do I do with the data sheets "injector offset matching data"

Thanks in advance to anyone that helps
 

Attachments

  • global deadtimes.PNG-1.png
    global deadtimes.PNG-1.png
    17.4 KB · Views: 79
  • Screenshot_2019-01-14-06-19-53.png
    Screenshot_2019-01-14-06-19-53.png
    505.2 KB · Views: 76
The injector offset table is telling you exactly how much your injector flows. I would use the average number as a starting point for the global calculations. Put in your voltage values and start tuning. If you're VE table is messed up then you need to go back to stock or have someone create one for that's competent.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top